- Adhesives / Sealants / Consumables
- Consumables - Tapes/Tubing/Filters/Fluids etc.
- SAS Attack. Universal Maintenance & Lubricant with PTFE. 200ml Aerosol
- Granville Brake & Clutch Fluid: 250ml bottle.
- Double-Sided Adhesive Foam Tape - Yellow Backing. Designed for automotive trim fixing. Delayed cure allows for repositioning where required. 25mm x 10m.
- CODAN Advance / Retard Tubing. Soft flexible chloroprene rubber. Inner Diameter 3mm. Length: 1 metre.
- CODAN Advance / Retard Tubing. Soft flexible chloroprene rubber. Inner Diameter 4mm. Length: 1 metre.
- Fuel Filter: Small Universal. General application.
- Fuel Filter: Large Universal. General application.
- Cable / Hose / Pipes Clips / Clamps
- Hose Clips
- Mini Hose Clamps
- Mini Hose Clamp 7-9mm. General application.
- Mini Hose Clamp 9-11mm. General application.
- Mini Hose Clamp 13-15mm. General application.
- Mini Hose Clamp 14-16mm. General application.
- Mini Hose Clamp 15-17mm. General application.
- Hose Clips - Expansion Type
- For 12.5 - 13.6mm outside hose diameter. General application.
- For 14.0 - 15.7mm outside hose diameter. SAAB and all Ford car fuel lines.
- For 18.1 - 20.0mm outside hose diameter. General application.
- For 28.0 - 29.5mm outside hose diameter. Ford range and general application.
- Single wire hose clip 'pinch' type, 3/4" outer hose diameter. Classic Mini and general application.
- Single wire hose clip 'pinch' type, 1" outer hose diameter. General application.
- JCS Hose Clips
- Hose clips, mild steel zinc plated, band width 9.5mm for hoses 9.5-12mm (3/8"-1/2")
- Hose clips, mild steel zinc plated, band width 9.5mm for hoses 11-16mm (1/2"- 5/8")
- Hose clips, mild steel zinc plated, band width 9.5mm for hoses 13-20mm (1/2"- 3/4")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 17-25mm (3/4"- 1")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 25-35mm (1"- 1 3/8")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 40-55mm (1 5/8"- 2 1/8")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 45-60mm (1 3/4"- 2 3/8")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 60-80mm (2 3/8"- 3 1/8")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 70-90mm (2 3/4"- 3 1/2")
- Hose clips, mild steel zinc plated, band width 12.5mm for hoses 80-100mm (3 1/8"- 4")
- Twin Wire Hose Clamps
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 13-16mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 13-16mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 24-27mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 24-27mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 43-47mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 43-47mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 60-66mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 60-66mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 66-72mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 68-74mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 72-78mm. General application.
- Twin Wire Hose Clamp, mild steel, zinc plated, for hoses 79-85mm. General application.
- Narrow Width (Norma) Hose Clips
- Norma Hose Clips, mild steel zinc plated, band width 9mm for hoses 16mm-25mm (5/8"-1")
- Norma Hose Clips, mild steel zinc plated, band width 9mm for hoses 20mm-32mm (3/4"-1.1/4")
- Norma Hose Clips, mild steel zinc plated, band width 9mm for hoses 32mm-50mm (1.1/4"-2")
- Norma Hose Clips, mild steel zinc plated, band width 9mm for hoses 40mm-60mm (1.5/8"-2.3/8")
- Norma Hose Clips, mild steel zinc plated, band width 9mm for hoses 50mm-70mm (2"-2.3/4")
- 'P' Clips - Metal/Plastic
- P'-Clip in zinc plated steel, 7.9mm x 4.8mm hole dia. General application.
- P'-Clip in zinc plated steel, 9.6mm x 4.8mm hole dia. General application.
- P'-Clip in zinc plated steel, 12.7mm x 4.8mm hole dia. General application.
- P'-Clip in zinc plated steel, 15.9mm x 4.8mm hole dia. General application.
- P'-Clip in zinc plated steel, 4.75mm x 6.0mm hole dia. General application.
- P'-Clip in stainless steel, 4.75mm x 6.0mm hole dia. General application.
- P'-Clip in zinc plated steel, 6.3mm x 6.0mm hole dia. General application.
- P'-Clip in stainless steel, 6.3mm x 6.0mm hole dia. General application.
- P'-Clip in zinc plated steel, 8.0mm x 6.0mm hole dia. General application.
- P'-Clip in stainless steel, 8.0mm x 6.0mm hole dia. General application.
- P'-Clip in zinc plated steel, 9.6mm x 6.0mm hole dia. General application.
- P'-Clip in stainless steel, 9.6mm x 6.0mm hole dia. General application.
- P'-Clip in zinc plated steel, 12.7mm x 6.0mm hole dia. General application.
- P'-Clip in stainless steel, 12.7mm x 6.0mm hole dia. General application.
- P'-Clip in zinc plated steel, 6.3mm x 7.1mm hole dia. General application.
- P'-Clip in zinc plated steel, 8.0mm x 7.1mm hole dia. General application.
- P'-Clip in zinc plated steel, 9.6mm x 7.1mm hole dia. General application.
- P'-Clip in zinc plated steel, 15.9mm x 7.1mm hole dia. General application.
- P'-Clip in zinc plated steel, 19.0mm x 7.1mm hole dia. General application.
- P'-Clip in zinc plated steel, 22.23mm x 7.1mm hole dia. General application.
- P'-Clip in zinc plated steel, 4.75mm x 8.5mm hole dia. General application.
- P'-Clip in zinc plated steel, 6.3mm x 8.5mm hole dia. General application.
- P'-Clip in zinc plated steel, 8.0mm x 8.5mm hole dia. General application.
- P'-Clip in zinc plated steel, 9.6mm x 8.5mm hole dia. General application.
- P'-Clip in zinc plated steel, 12.7mm x 8.5mm hole dia. General application.
- P'-Clip in zinc plated steel, 15.9mm x 8.5mm hole dia. General application.
- P'-Clip in zinc plated steel, 12.7mm x 10.3mm hole dia. General application.
- Plastic 'P' clip for 4.8mm cable/pipe. General application.
- Plastic 'P' clip for 6.0mm cable/pipe. General application.
- Plastic 'P' clip for 7.9mm cable/pipe. General application.
- Plastic 'P' clip for 9.5mm cable/pipe. General application.
- Plastic 'P' clip for 12.7mm cable/pipe. General application.
- Plastic 'P' clip for 19.4mm cable/pipe. General application.
- Pipe Clips - Plastic
- Pipe Clip (2 x Fuel Lines, 8mm x 6mm) with stud fixing. Ford Range.
- Pipe Clip (2 x Fuel Lines, 8mm x 8mm) with stud fixing. Ford Range.
- Bulkhead Pipe Clip (3 x Brake Lines) Right Angled with stud fixing. Ford Range.
- Bulkhead Pipe Clip (2 x Brake Lines,1 x Servo) Right Angled with stud fixing. Ford Range.
- For 3/16" diameter pipe. Ford and general application.
- Plastic 'In-Air' pipe clip: twin 3/16" dia. pipes. BL, Ford and general application.
- For 3/16" diameter pipe. Triumph, Rover, Jaguar, VW, Opel, SAAB, Ford Transit and Avenger
- For 3/16" diameter pipe in white. Ford, Jaguar and general application
- For 1/4" diameter pipe. Rover,Metro, Avenger, Ford Escort, Mercedes,Saab.
- For 5/16" diameter pipe in grey. Ford.
- For 3/8" diameter pipe. Rover, Mercedes
- For twin 3/16" diameter pipe. Triumph, Rover, Jaguar.
- For twin 3/16" diameter pipes. Vauxhall
- For twin 3/16" diameter pipes. General application
- For twin 3/16" diameter pipes with a sealing ring. General application.
- For single 6mm diameter pipes in black. Ford, Aston Martin and general application.
- For twin 5/16" diameter pipes in black. Ford, BL, Triumph and general application.
- For triple 3/16" diameter pipes. General application. Grey.
- For 3/16" and 1/4" diameter pipe combinations. Triumph and general application.
- For 1/4" and 5/16" diameter pipe combinations. Triumph 2000/2.5 MK1/11and general application.
- For 5/16" and 5/16" diameter pipe combinations. Triumph and general application.
- For twin 3/8"" diameter pipes. General application.
- For 1/4" and 5/16" diameter pipe combinations. Ford and general application.
- Plastic Radiator Hose Clip for 20.0mm diameter hose. Vauxhall and general application.
- Chassis/Saddle Clamps - Metal
- Brake Hardware- Double 'P' Clip- 2 x 3/16" with 1/4" hole. Triumph and general application.
- Brake Hardware- Twin Way Metal Brake Pipe clip. 2 x 3/16" and 1/4". Triumph and general application.
- Brake Hardware- Twin Way Metal Brake Pipe clip. 3x 3/16" and 1/4". Triumph and general application.
- Brake Hardware- Twin Way Metal Brake/Fuel Pipe clip. 1/4" x 1/4". General application.
- Brake Hardware- Twin Way Metal Brake/Fuel Pipe clip. 5/16" x 5/16". General application.
- Brake Hardware- Metal Brake/Fuel Pipe clip. Triumph TR5/6
- Chassis Clamp in zinc plated steel. General application.
- Chassis Clamp in zinc plated steel. General application.
- Chassis Clamp in zinc plated steel. General application.
- Half Saddle Clamp (5/16"). General application.
- Half Saddle Clamp (1/2"). General application.
- Half Saddle Clamp (2 x 5/16"). General application.
- Edge Clips
- Edge Clips (including 'D' and 'S' types and Edge Panel Clips)
- D' type edge clip for 1.4mm material thickness. BL Rover, Triumph, Hillman Minx, Singer Gazelle and Vogue, Sunbeam Rapier.
- D' type edge clip for 2.0mm material thickness. Humber Sceptre, Lotus Elan, and general application.
- D' type edge clip, height 7.9mm, for 2.6 -2.8mm material thickness, width 12.7mm. General application.
- D' type edge clip for 1.2 - 3.4mm material thicknesses. All BL Austin/Morris, Triumph, Rover , Saab and general application.
- D' type edge clip for 3.6mm material thickness. BL Allegro, Triumph Spitfire and general application.
- D' type edge clip, height 11.0mm and material thickness of 4.8mm-5.0mm. Jaguar 'E' Type and general application.
- Edge/Flange Finisher Clip 9.6mm height, for material thickness of 1.3-2.0mm, width 6.3mm. Triumph Spitfire/GT6 Wings, and general application.
- Edge clip for 2.0-2.5 material thicknesses. Jaguar 'E' type sill finisher.
- Edge clip 4.42mm height, for material thickness of 2.0mm-2.5mm, width 12.7mm. Alt. for Ford headlining and general application.
- Edge clip 6.0mm height, for material thickness of 1.2mm-2.2mm, width 12.7mm. General application.
- Edge clip 6.4mm height, for material thickness of 1.2mm-2.0mm, width 38.1mm. General application.
- Edge clip 6.7mm height, for material thickness of 2.0mm-2.5mm, width 7.9mm. Early Fords,Triumph and general application
- Edge clip 7.1mm height, for material thickness of 1.7 - 2.0mm, width 12.7mm. General application.
- Edge clip 8.2mm height, for material thickness of 0.8-2.0mm, width 12.7mm. Minor 1000, Humber Sceptre and general application.
- Edge clip 8.7mm height, for material thickness of 0.8 - 2.0mm, width 12.7mm. General application.
- Edge clip 8.7mm height, for material thickness of 1.5mm, width 16.0mm. General application.
- Edge clip 8.7mm height, for material thickness of 2.0-2.8mm, width 12.7mm. General application.
- Edge clip 8.7mm height, for material thickness of 3.2-3.6mm, width 12.7mm. General application.
- Edge clip 9.3mm height, for material thickness of 4.4-5.6mm, width 12.7mm. General application.
- Edge clip 9.9mm height, for material thickness of 4.4-5.5mm, width 12.7mm. Triumph, Rover and general application.
- Edge clip 9.9mm height, for material thickness 6.4-7.9mm, width 12.7mm. General application.
- Edge clip for material thickness 3.2mm - 5.1mm and 12.7mm depth. Jaguar XJ6.
- Edge panel clip, height 9.5mm for 9.0mm-9.5mm material thickness. General application.
- S' type edge clip for 0.6 - 1.0mm and 2.3 - 2.8mm material thickness. General application.
- S' type edge clip for 1.5 - 2.0mm and 2.0 - 2.3mm material thickness. Triumph and general application.
- S' type edge clip for 1.5 - 2.0mm and 2.0 - 2.3mm material thickness. General application.
- S' type edge clip for 1.5 - 2.4mm and 2.6 - 3.2mm material thickness with flush outer sides. Landrover and general application.
- S' type edge clip for 0.5 - 1.2mm and 0.5 - 1.2mm material thickness. TR5 weatherstrip seal and general application.
- S' type edge clip for 2.2mm and 2.9mm material thicknesses. Depth 9.7mm and width 12.7mm. General application.
- S' type removeable edge clip for 0.5 - 1.1mm and 1.3 - 1.6mm material thickness. Jaguar and general application.
- S' type edge clip for 2.4mm and 5.5mm material thicknesses. Depth 17mm and Width 12.7mm. Not barbed. Triumph Stag,TR4-6 seat back.
- Edge Clips - Fascia/Trim Type
- Edge Clip - Fascia/Trim Type. Panel Thickness 0.7mm, Trim Thickness 1.5mm. General application.
- Edge / Tongue, Cable / Pipe Clips
- Metal "in air" pipe clip for 3/16" and 5/16" diameter pipes. Triumph, Ford and general application.
- Metal "in air" pipe clip for 1/4" and 5/16" diameter pipes. Ford Granada and general application.
- Metal "in air" pipe clip for 2 X 5/16" diameter pipes. Triumph, Ford and general application.
- Metal "in air" pipe clip for brake & vacuum lines. Triumph and general application.
- Edge cable/pipe clip for ¼" brake pipe and 1.0-1.6mm panel thickness. Triumph.
- Edge cable/pipe clip for twin 3/32" diameters and 3.5mm panel thickness. General Application.
- Edge cable/pipe clip for twin 3/16" diameters and 0.6-4.5mm panel thickness. Ford Capri MK1, Triumph and general application.
- Edge cable/pipe clip for twin 3/16" diameters and 2.0-4.7mm panel thickness. General application.
- Edge cable/pipe clip for 4.8mm diameter and 4.8-7.1mm panel thickness. Triumph and general application.
- Edge cable/pipe clip for twin 1/4" diameters and 1.0 - 1.6mm panel thickness. General purpose
- Edge cable/pipe clip for twin 5/16" diameters and 1.0 - 1.2mm panel thickness. General purpose
- Edge cable/pipe clip for twin 3.0mm diameters and 1.2-2.0mm panel thickness. General application.
- Edge cable/pipe clip for 6.1mm diameter and 0.5 - 1.2mm panel thickness. General application.
- Edge cable/pipe clip for 8-9mm diameter. Panel thickness from 2.0mm - 4.1mm. General application.
- Edge cable/pipe clip for 20-24mm diameter. Panel thickness from 2.0mm - 4.1mm. General application.
- Edge cable/Pipe clip for 8.2mm diameter pipe and 1.8 - 2.4mm panel thickness. General application.
- Edge cable/pipe clip for 8.5mm diameter pipe and 1.2 - 2.0mm panel thickness. General application.
- Edge cable/pipe clip for 8.5mm diameter pipe and 4.0-5.6mm panel thickness. General application.
- Edge cable/pipe clip for 10.9mm diameter pipe and 1.2mm panel thickness. Mini overflow pipe.
- Edge cable/pipe clip for 11.1mm diameter pipe and 0.6-1.2mm panel thickness. Ford radiator overflow pipe.
- Edge cable/pipe clip for 11.2mm diameter pipe and 1.0 -2.4mm panel thickness. General application
- Edge cable/pipe clip for 0.2 - 1.6mm panel thickness. Pipe diameters 2.5mm & 5.6mm. General application
- Edge cable/pipe clip for 0.4 - 0.9mm panel thickness. Pipe diameter 8.0mm. Flared. General application
- Edge cable/pipe clip for 1.0-1.5mm panel thickness. Pipe diameter 6.3-7.2mm. Flared. General application
- Cable/pipe clip (Tongue type) for 4.0 - 7.0mm diameter cable/pipe. General application.
- Cable/pipe clip (Tongue type) for 4.8mm diameter cable/pipe. Early Fords, B.Leyland and general application.
- Cable/pipe clip (Tongue type) for 15.9mm (5/8") diameter cable/pipe. Classic Mini and general application.
- Right angled mount screw/rivet fix. General application.
- Right angled cable/pipe clip, screw/rivet fix. 3/16" pipe size. General application.
- Battery cable clip. Ford Transit and general application.
- Weatherseal Clips
- Weatherstrip clip - Phosphate Black. Ford Consul Granada, Transit MK1, Zephyr/Zodiac MK3
- Weatherstrip clip. Ford Capri, Cortina, Escort.
- Weatherstrip clip. Ford Capri MK1 (Outer) and general application
- Weatherstrip/Moulding clip. Ford Capri MK2/3 (Outer)
- Weatherstrip clip. Ford Anglia 105E and general application.
- Weatherseal clip. MG Midget and general application.
- Weatherstrip clip. Alfa Romeo 750 Spider and general application
- Weatherstrip clip for 3.2mm strip and 0.6 - 1.2mm panel thickness. General application.
- (Black finish). Weatherstrip clip. Triumph 2000, TR6, Lotus and Jaguar
- (Blue paint finish). Weatherstip clip used on Triumph Spitfire, GT6 and Stag
- (Green paint finish). Weatherstrip clip to accept increased thickness of seal compared with Part No. 14891. Chrysler Sunbeam and Triumph
- Weatherseal clip used on Sunbeam Alpine/Tiger
- Weatherstrip clip. Triumph Dolomite and Jaguar
- Weatherseal clip. VW Golf and Scirroco.
- Weatherstrip Clip. General application
- Weatherseal clip for 3.1 - 3.8 material thicknesses. Chrysler Sunbeam outer waist seal, TR7 weatherstrip seal and general application.
- Flange finisher clip. Triumph 2000, Herald, Dolomite, TR6, Stag, Riley, BL Mini
- Weatherseal clip to accept increased material thickness as compared with 19730. Triumph, DeLorean
- Weatherseal clip: 12.7mm wide, 9.7mm depth, panel thickness 2.5-3.2mm. General application.
- Clip for rubber boot seal. Mini
- Electrical Hardware
- Cable / Wiring Clips and Ties
- Cable Harness Clip (Larger Size). Ford Cortina/Sierra/Transit and general application.
- Corrugated Conduit Clip. General application.
- Cable Tie length 118mm, width 2.5mm with a low profile catch. General application.
- Cable Tie length 165mm, width 2.5mm. General application.
- Cable Tie length 210mm, width 4.8mm. General application.
- Cable Tie for panel fixing. Releasable. General application.
- Cable Tie for panel fixing. Releasable. General application.
- HT Cable/Terminals
- HT (High Tension) Cable: non-resistive copper core. Sold in 1 metre lengths. General application
- HT (High Tension) Cable: resistive - TPE insulated. Sold in 1 metre lengths. General application
- Insulated/Bullet Terminals, Connectors
- Bullet Terminal, 4.6mm in brass. For wire 0.5 - 2.5sq mm. General application
- Bullet Connector (Single) used with ET39. General application
- Bullet Connector (Double) used with ET39. General application
- Push-on females 2.8mm, for cable size 0.5mm-1.5mm, in red
- Push-on females 4.8mm, for cable size 0.5mm-1.5mm, in red
- Push-on females 6.3mm, for cable size 0.5mm-1.5mm, in red
- Push-on females, fully insulated 2.8mm, for cable size 0.5mm-1.5mm, in red
- Push-on females, fully insulated 4.8mm, for cable size 0.5mm-1.5mm, in red
- Piggy-backs 6.3mm, for cable size 0.5mm-1.5mm, in red
- Push-on males 6.3mm, for cable size 0.5mm-1.5mm, in red
- Push-on males, fully insulated 6.3mm, for cable size 0.5mm-1.5mm, in red
- Bullets, 4.0mm outside diameter , for cable size 0.5mm-1.5mm, in red
- Receptacle sockets 4mm outside diameter , for cable size 0.5mm-1.5mm, in red
- Butt connectors 3.3mm outside diameter, for cable size 0.5mm-1.5mm, in red
- Forks 3.7mm (4BA), for cable size 0.5mm-1.5mm, in red
- Forks 5.3mm (2BA), for cable size 0.5mm-1.5mm, in red
- Blades 18mm length,2.3mm width, for cable size 0.5mm-1.5mm, in red
- Pins 12mm length, 1.9mm outside diameter, for cable size 0.5mm-1.5mm, in red
- Rings (standard length) 4.3mm hole size, for cable size 0.5mm-1.5mm, in red
- Rings (standard length) 5.3mm (2BA) hole size, for cable size 0.5mm-1.5mm, in red
- Rings (standard length) 6.4mm (1/4") hole size, for cable size 0.5mm-1.5mm, in red
- Rings (standard length) 8.4mm (5/16") hole size, for cable size 0.5mm-1.5mm, in red
- Push-on females 4.8mm, for cable size 1.5mm-2.5mm, in blue
- Push-on females 6.3mm, for cable size 1.5mm-2.5mm, in blue
- Push-on females, fully insulated 4.8mm, for cable size 1.5mm-2.5mm, in blue
- Push-on females, fully insulated 6.3mm, for cable size 1.5mm-2.5mm, in blue
- Piggy-backs 6.3mm, for cable size 1.5mm-2.5mm, in blue
- Push-on males 6.3mm, for cable size 1.5mm-2.5mm, in blue
- Bullets, 5.0mm outside diameter , for cable size 1.5mm-2.5mm, in blue
- Receptacle sockets 5mm outside diameter, for cable size10.5mm-2.5mm, in blue
- Butt connectors 4mm outside diameter, for cable size 1.5mm-2.5mm, in blue
- Butt connectors 4mm outside diameter, for cable size 1.5mm-2.5mm, in blue
- Forks 5.3mm (2BA), for cable size 1.5mm-2.5mm, in blue
- Blades 18mm length,2.3mm width, for cable size 1.5mm-2.5mm, in blue
- Pins 12mm length, 1.9mm outside diameter, for cable size 1.5mm-2.5mm, in blue
- Rings (standard length) 4.3mm hole size, for cable size 1.5mm-2.5mm, in blue
- Rings (standard length) 5.3mm (2BA) hole size, for cable size 1.5mm-2.5mm, in blue
- Rings (standard length) 6.4mm (1/4") hole size, for cable size 1.5mm-2.5mm, in blue
- Rings (standard length) 8.4mm (5/16") hole size, for cable size 1.5mm-2.5mm, in blue
- Rings (standard length) 10.5mm (3/8") hole size, for cable size 1.5mm-2.5mm, in blue
- Rings (standard length) 13mm (1/2") hole size, for cable size 1.5mm-2.5mm, in blue
- Push-on females 6.3mm, for cable size 4mm-6mm, in yellow
- Push-on females 9.5mm, for cable size 4mm-6mm, in yellow
- Push-on females, fully insulated 6.3mm, for cable size 4mm-6mm, in yellow
- Push-on females, fully insulated 9.5mm, for cable size 4mm-6mm, in yellow
- Push-on males 6.3mm, for cable size 4mm-6mm, in yellow
- Butt connectors 5.5mm outside diameter, for cable size 4mm-6mm, in yellow
- Pins 14mm length, 2.9mm outside diameter, for cable size 4mm-6mm, in yellow
- Rings (standard length) 5.3mm (2BA) hole size, for cable size 4mm-6mm, in yellow
- Rings (standard length) 6.4mm (1/4") hole size, for cable size 4mm-6mm, in yellow
- Rings (standard length) 8.4mm (5/16") hole size, for cable size 4mm-6mm, in yellow
- Rings (standard length) 10.5mm (3/8") hole size, for cable size 4mm-6mm, in yellow
- Rings (standard length) 13mm (1/2") hole size, for cable size 4mm-6mm, in yellow
- Switches
- Electric Window/Aerial Rocker Switch.
- Toggle Switch. Off/On
- Toggle Switch. On/On
- Toggle Switch. On/Off/On
- Door Switch (With rubber gasket).
- Door/Alarm Switch.
- Door/Alarm Switch.
- Button Switch in plastic
- Button Switch in Nickel Plated brass
- Battery Isolator Switch. (Boxed with one key).
- Battery Isolator Switch. Heavy Duty. (Boxed with one key).
- Wiring Loom Cable
- Wiring Loom Cable. Black - 8 AMP
- Wiring Loom Cable. Black - 17 AMP
- Wiring Loom Cable. Red - 8 AMP
- Wiring Loom Cable. Red - 17 AMP
- Wiring Loom Cable. Green - 8 AMP
- Wiring Loom Cable. Green - 17 AMP
- Wiring Loom Cable. Blue - 8 AMP
- Wiring Loom Cable. Blue - 17 AMP
- Wiring Loom Cable. Yellow - 8 AMP
- Wiring Loom Cable. Yellow - 17 AMP
- Wiring Loom Tape
- PVC Insulation Tape in black. (Adhesive)
- Loom Tape - Plastic in black. (Non-adhesive)
- PVC Insulation Tape in Grey. (Adhesive)
- Loom Tape - Linen in black.
- Mechanical Hardware
- Brake / Fuel Hardware
- Brake Hardware
- Handbrake Cable Return Spring. Ford Zephyr/Zodiac MK3, Lotus Cortina/GT, Classic Capri.
- Handbrake Gaiter Backing Plate. Ford Zephyr/Zodiac MK3, Lotus Cortina/GT, Classic Capri.
- Brake Hardware- Bowed Horseshoe Clips for rear wheel cylinder (pack includes 2 pairs- sufficient for one car). Girling Type 75. Early Fords, Triumph.
- Brake Hardware- Brake hose 'U' Clamp. Ford Escort, Cortina, Sierra and general application.
- Brake Hardware- Brake hose 'U' Clamp. Ford Cortina, Escort, Sierra and general application.
- Brake Hardware- 'R' clip 1.2mm dia wire, for front caliper kits. Ford, Vauxhall and general application.
- Brake Hardware- 3/16" Brake line clip. Hole diameter 1/4". General application.
- Metal brake pipe clip. Triumph Herald/Vitesse, Spitfire/GT6
- Brake Tubing, Copper, 20 gauge. Outside diameter 3/16". Sold in 5ft lengths- for 10ft order 2 'packs', for 15ft 3 'packs' and so on. Max length= 25ft (5 packs)
- Brake Pipe- Seamless 90/10 Cupro-Nickel, 22 Gauge. Outside diameter 3/16".
- Brake Pipe- Seamless 90/10 Cupro-Nickel, 22 Gauge. Outside diameter 5/16".
- Brake Bleed Screws
- Brake Bleed Screws 1/4" unf x 28 tpi- for Mini
- Brake Bleed Screws 3/8"unf x24 tpi- for British Cars
- Brake Bleed Screws 6mm x 1mm pitch x 29mm- for VW, BMW
- Brake Bleed Screws 6mm x1mm pitch x 38mm- for VW, Audi
- Brake Bleed Screws 7mm x 1mm pitch - for VW, Audi
- Brake Bleed Screws 8mm x 1.25mm pitch - for Fiat
- Brake Bleed Screws 10mm x 1mm medium pitch - for Ford
- Brake Pins/Springs/Washers
- Brake Pins- for Ford
- Brake Pins- for Rover
- Brake Pins- for Vauxhall
- Brake Washers- for Lockheed type
- Brake Washers- for Girling type
- Brake Springs- for Ford
- Brake Springs- for Vauxhall
- Brake Springs- for Lockhead
- Brake Springs- for BL
- Fuel Pipe Unions/Olives
- Fuel pipe union, 1/2" x 20TPI for 1/4" pipe. Vauxhall and general application.
- Fuel pipe union, 7/16" x 20TPI for 1/4" pipe. General application.
- Fuel pipe union (female), 7/16" x 20TPI for 1/4" pipe. General application.
- Circlips/Linkage Clips - External/Internal/ 'E' Type and Retaining/Omega Rings
- Circlips - External
- Circlips - External. Imperial Sizes
- Circlip - External. Shaft size 3/4"
- Circlip - External. Shaft size 25/32"
- Circlip - External. Shaft size 63/64"
- Circlip - External. Shaft size 1.3/16"
- Circlip - External. Shaft size 1.5/16"
- Circlips - Internal
- Circlips - Internal. Imperial Sizes
- Circlip - Internal. Bore size 7/8"
- Circlip - Internal. Bore size 1.1/4"
- Circlip - Internal. Bore size 1.3/8"
- Circlips - Internal. Metric Sizes
- Circlip - Internal 25.40mm dia., thickness 1.2mm. Ford Speedo Cable to Gearbox.
- Clevis Pin Retainers
- Clevis Pin Retainer for 1/4" Grooved Pin
- Clevis Pin Retainer for 3/8" Grooved Pin
- Omega Clips
- Omega Clip. Groove dia. 3.5mm. Jaguar Door Control Rod.
- Omega Clip. Groove dia. 4.0mm. Ford Cortina MK11 Door Control Rod.
- Omega Clip. Groove dia. 5.0mm. Ford Capri Door Control Rod.
- Omega Clip. Groove dia. 7.5mm. General application.
- Omega Clip. Groove dia.10.0mm. General application.
- Omega Clip. Groove dia.12.8mm. General application.
- Window Winder Handle Clip. Vauxhall, Ford and general application.
- Clevis Pins
- Clevis Pins 3/16" x 9/16" (4.8mm x 14.28mm). Grip Length 7/16" (11.11mm)
- Clevis Pins 3/16" x 5/8" (4.8mm x 15.9mm). Grip Length 15/32" (12.2mm)
- Clevis Pins 1/4" x 5/8" (6.4mm x 15.88mm). Grip Length 7/16" (11.11mm). Triumph Range Handbrake cable.
- Clevis Pins 6.0mm x 20mm. Grip Length 15.70mm
- Clevis Pins 5/16" x 5/8" (7.9mm x 15.88mm). Grip Length 13/32" (10.32mm)
- Clevis Pins 5/16" x 1.3/4" (7.9mm x 44.46mm). Grip Length 1.1/2" (38.1mm)
- Control Cable / Rod Clips - Metal and Plastic
- Handle to Latch Rod Clip (Short). Ford and general application.
- Handle to Latch Rod Clip (Long). Ford, BL and general application.
- Choke cable to carburettor abutment bracket clip. Classic Mini
- Linkage clip for a 3.2mm (1/8") dia. linkage rod. Door lock rods and general application.
- Solderless Nipple 11/32" x 1/2". General application
- Solderless Nipple 9/32" x 1/2". General application
- Ratchet Plate for drop glass regulator. Triumph Spitfire/GT6, TR4-250.
- Fixed Knob Clip. 4.8mm Shaft. General application.
- Seat Back Release Knob Clip. 6.3mm Shaft. Triumph, and general application.
- Linkage clip for 3.2mm (1/8") diameter linkage rod. General application.
- Linkage clip for 3.2mm (1/8") diameter linkage rod. Land Rover and general application.
- Door linkage clip/ Seat back linkage clip. General application.
- Linkage clip for a 4.8mm (3/16") dia. linkage rod. Jaguar 'E' Type, Triumph and general application.
- Linkage clip for a 6.4mm (1/4") dia. linkage rod. Jaguar, Triumph and general application.
- Linkage clip for a 7.9mm (5/16") dia. linkage rod. Bonnet stays, Tractor linkages, and general application.
- Linkage/Guide clip for 1/8" rod with tongue fixing. General application.
- Linkage clip in plastic for a 1/8" diameter rod. General application.
- Metal Linkage Clip for throttle and door linkages. Ford and General application.
- For securing 3/16" diameter Bowden type control cable. Super Minx, Singer Vogue, Avenger, Humber Sceptre and Ford vehicles
- For securing 3/16" diameter Bowden type control cable. Ford Cortina/Escort MK1
- Armoured control cable clip for a 4.2mm cable. General application.
- Armoured control cable clip for a 4.8mm-5.6mm cable. General application.
- Captive door lock bush. Ford range and general application.
- Nylon snap-in nut, suits VW, Audi
- Nylon Control Rod Clip. Ford and general application.
- Nylon Control Rod Clip. Ford and general application.
- Exhaust/Inlet Manifold Studs, Nuts and Hardware
- Exhaust Strap Clamp Plate. Triumph and general application
- Exhaust Bobbin, 5/16" UNF thread. Classic Mini.
- Exhaust Bobbin, 6.0mm thread. General application.
- Exhaust Mounting in Rubber . VW, Vauxhall and general application.
- Exhaust Mounting Ring in Rubber (35mm) . General application.
- Exhaust Mounting Ring in Rubber (45mm) . General application.
- Exhaust/Inlet Manifold Nuts, brass, 5/16" UNC . Ford and general application
- Exhaust/Inlet Manifold Nuts, brass, 3/8" UNF . Jaguar, Vauxhall and general application
- Exhaust/Inlet Manifold Nuts, brass, 3/8" UNF x 3/4" Deep . General application
- Exhaust/Inlet Manifold Nuts, brass, 3/8" UNC . Ford, Volvo and general application
- Exhaust/Inlet Manifold Nuts, copper flashed steel (DIN 980) M8 x 1.25mm
- Exhaust/Inlet Manifold Nuts, copper flashed steel (DIN 980) M10 x 1.5mm
- Exhaust/Inlet Manifold Nuts, brass, M8 x 1.25mm
- Exhaust/Inlet Manifold Nuts, brass, M10 x 1.25mm
- Exhaust/Inlet Manifold Nuts, brass, M10 x 1.5mm
- Exhaust/Inlet Manifold Studs M8 x 37 x 1.25 pitch
- Exhaust/Inlet Manifold Studs M8 x 42 x 1.25 pitch
- Exhaust/Inlet Manifold Studs M10 x 37 x 1.25 pitch
- Exhaust/Inlet Manifold Studs M10 x 38 x 1.5 pitch
- Exhaust/Inlet Manifold Studs M10 x 52 x 1.5 pitch
- Exhaust/Inlet Manifold Studs M10 x 55 x 1.5 pitch
- Exhaust/Inlet Manifold Studs 5/16"UNC x 5/16"UNC x 1.11/16" length. Ford and general application
- Exhaust/Inlet Manifold Studs 5/16"UNC x 5/16"UNF x 1.1/4" length. Austin/Rover/MG and general application
- Exhaust/Inlet Manifold Studs 5/16"UNC x 5/16"UNF x 1.5/8" length. Austin/Rover/MG and general application
- Exhaust/Inlet Manifold Studs 5/16"UNC x 5/16"UNF x 1.11/16" length. MGB and general application
- Exhaust/Inlet Manifold Studs 5/16"UNC x 5/16"UNF x 2.1/4" length. Ford and general application
- Exhaust/Inlet Manifold Studs 5/16"UNF x 5/16"UNF x 1.1/4" length. Triumph and general application
- Exhaust/Inlet Manifold Studs 5/16"UNF x 5/16"UNF x 1.11/16" length. Triumph and general application
- Exhaust/Inlet Manifold Studs 3/8"UNC x 3/8"UNC x 1.9/16" length. Volvo and general application
- Exhaust/Inlet Manifold Studs 3/8"UNC x 3/8"UNC x 1.13/16" length. Triumph, Volvo and general application
- Exhaust/Inlet Manifold Studs 3/8"UNF x 3/8"UNF x 1.7/8" length. Jaguar and general application
- Exhaust/Inlet Manifold Studs 3/8"UNF x 3/8"UNF x 2.3/16" length. Vauxhall and general application
- Grease Nipples
- Grease Nipple, M6 x 1.0mm, straight. General application.
- Grease Nipple, M6 x 1.0mm, 45 deg. General application.
- Grease Nipple, M6 x 1.0mm, 90 deg. General application.
- Grease Nipple, 1/4 unf, straight. General application.
- Grease Nipple, 1/4 unf, long straight. General application.
- Grease Nipple, 1/4 unf, 45 deg. General application.
- Grease Nipple, 1/4 unf, 90 deg. General application.
- Grease Nipple, 1/8 bsp gas, straight. General application.
- Grease Nipple, 1/8 bsp gas, 45 deg. General application.
- Grease Nipple, 1/8 bsp gas, 90 deg. General application.
- Grease Nipple, 1/4 bsp, straight. General application.
- Grease Nipple, 1/4 bsp, 45 deg. General application.
- Grease Nipple, 1/4 bsp, 90 deg. General application.
- Hex Bolts and Set Screws
- Hex Bolts - Metric
- M6x40mm HT Hex Bolt. General application.
- M6x130mm HT Hex Bolt. General application.
- M8x40mm HT Hex Bolt. General application.
- M8x45mm HT Hex Bolt. General application.
- M8x50mm HT Hex Bolt. General application.
- M8x55mm HT Hex Bolt. General application.
- M8x65mm HT Hex Bolt. General application.
- M8x80mm HT Hex Bolt. General application.
- M8x110mm HT Hex Bolt. General application.
- M10x40mm HT Hex Bolt. General application.
- M10x50mm HT Hex Bolt. General application.
- M10x55mm HT Hex Bolt. General application.
- M10x60mm HT Hex Bolt. General application.
- M10x65mm HT Hex Bolt. General application.
- M10x70mm HT Hex Bolt. General application.
- M10x75mm HT Hex Bolt. General application.
- M10x90mm HT Hex Bolt. General application.
- M10x130mm HT Hex Bolt. General application.
- M10x150mm HT Hex Bolt. General application.
- M12x45mm HT Hex Bolt. General application.
- M12x50mm HT Hex Bolt. General application.
- M12x60mm HT Hex Bolt. General application.
- M12x75mm HT Hex Bolt. General application.
- M12x80mm HT Hex Bolt. General application.
- M12x90mm HT Hex Bolt. General application.
- M12x100mm HT Hex Bolt. General application.
- M12x110mm HT Hex Bolt. General application.
- M12x120mm HT Hex Bolt. General application.
- M12x140mm HT Hex Bolt. General application.
- M12x150mm HT Hex Bolt. General application.
- Hex Bolts - BSF
- Hex Bolts - UNC
- 1/4" UNC x 1.1/2" HT Hex Bolt in self colour steel. General application.
- Hex Bolts - UNF
- 5/16" UNF x 1.1/8" HT Hex Bolt in zinc plated steel. General application.
- Hex Set Screws - Metric
- Hex Set Screws (Flanged) - Metric
- Set Screw M6x16mm Serrated, Flanged. General application.
- Set Screw M6x20mm Serrated, Flanged. General application.
- Set Screw M6x25mm Serrated, Flanged. General application.
- Set Screw M6x30mm Serrated, Flanged. General application.
- Set Screw M8x20mm Serrated, Flanged. General application.
- Set Screw M8x25mm Serrated, Flanged. General application.
- Set Screw M8x30mm Serrated, Flanged. General application.
- Set Screw M8x40mm Serrated, Flanged. General application.
- Set Screw M10x25mm Serrated, Flanged. General application.
- Set Screw M10x30mm Serrated, Flanged. General application.
- Set Screw M10x40mm Serrated, Flanged. General application.
- Set Screw M10x50mm Serrated, Flanged. General application.
- Hex Set Screws - BA
- 2BA x 3/4" Hex Set Screw in zinc plated mild steel. General application.
- Hex Set Screws - BSF
- 1/4" BSF x 1/2" HT Hex Set Screw in zinc plated steel. Morris 1000 and general application
- 1/4" BSF x 5/8" HT Hex Set Screw in zinc plated steel. Morris 1000 and general application
- 1/4" BSF x 3/4" HT Hex Set Screw in zinc plated steel. Morris 1000 and general application
- 1/4" BSF x 1" HT Hex Set Screw in zinc plated steel. General application
- Hex Set Screws - UNC
- 1/4" UNC x 3/4" Hex Set Screw in zinc plated steel. General application.
- 1/4" UNC x 1.1/2" Hex Set Screw in zinc plated steel. General application.
- 5/16" UNC x 1" Hex Set Screw in zinc plated steel. General application.
- 5/16" UNC x 1.1/4" Hex Set Screw in zinc plated steel. General application.
- Hex Set Screws - UNF
- 10-32UNF x 3/8" Hex Set Screw in zinc plate. General application.
- 10-32UNF x 1/2" Hex Set Screw in zinc plate. General application.
- 10-32UNF x 5/8" Hex Set Screw in zinc plate. Rover P5/5B and general application.
- 10-32UNF x 3/4" Hex Set Screw in zinc plate. Rover P5/5B and general application.
- 10-32UNF x 1" Hex Set Screw in zinc plate. General application.
- 1/4" UNF x 3/8" Hex Set Screw in zinc plated steel. General application.
- 1/4" UNF x 1/2" Hex Set Screw in zinc plated steel. Rover P5/5B and general application.
- 1/4" UNF x 5/8" Hex Set Screw in zinc plated steel. Rover P5/5B and general application.
- 1/4" UNF x 3/4" Hex Set Screw in zinc plated steel. General application.
- 1/4" UNF x 7/8" Hex Set Screw in zinc plated steel. General application.
- 1/4" UNF x 1" Hex Set Screw in zinc plated steel. General application.
- 1/4" UNF x 1.1/4" Hex Set Screw in zinc plated steel. General application.
- 5/16" UNF x 3/4" Hex Set Screw in stainless steel. General application.
- 5/16" UNF x 3/4" Hex Set Screw in zinc plated steel. General application.
- 5/16" UNF x 1" Hex Set Screw, domed in chrome plate. Triumph, and general application.
- 5/16" UNF x 1.1/2" Hex Set Screw, in zinc plated steel. General application.
- 3/8" UNF x 3/4" Hex Set Screw in zinc plated steel. General application.
- 3/8" UNF x 7/8" Hex Set Screw in zinc plated steel. General application.
- 3/8" UNF x 1" Hex Set Screw in zinc plated steel. General application.
- 3/8" UNF x 1.3/4" Hex Set Screw in zinc plated steel. General application.
- Hex Self-tapping Screws
- No.6 x 3/4" screw: Hex-headed, self-tapping in zinc plated steel. General application.
- No.8 x 1" screw: Hex-headed, self-tapping in zinc plated steel. General application.
- No.10 x 1" screw: Hex-headed, self-tapping in zinc plated steel. General application.
- No.10 x 1" screw: Hex-headed, self-tapping in stainless steel. General application.
- No.12 x 3/4" screw: Hex-headed, self-tapping in stainless steel. General application.
- No.14 x 1" Hex self-tapping screw in zinc plated steel. General application.
- 6.3mm x 25mm type 'E' blunt point screw with hexagon head in steel. Used with SNJ1761 and SNJ1861 and general application.
- 7.9mm x 20mm type 'E' blunt point screw with hexagon head in steel. Rover P6 wing and general application.
- No.10 x 1/2" ZPY Hex self-tapping screw with a washer. General application.
- No.12 x 1/2" ZPY Hex self-tapping screw with a washer. General application.
- No.14 x 1/2" ZPY Hex self-tapping screw with a washer. General application.
- Hinges and Hinge Pins
- 2" Mild Steel Hinge. General application.
- Door Hinge Pins DIN 1481 size M8 x 50mm. Ford Fiesta and general application.
- Door Hinge Pins DIN 1481 size M8 x 60mm. Ford and general application.
- Door Hinge Pins DIN 1481 size M8 x 70mm. Ford Granada and general application.
- Nuts - Various/Rivnut
- Hex Nuts
- 6-32UNC Hex C/F Full Nut. General application.
- 6-32UNC Hex K-Lock Nut. General application.
- 8-32UNC Hex C/F Full Nut. General application.
- 8-32UNC Hex K-Lock Nut. General application.
- 10-32UNF Half Nut in mild steel. General application.
- 2BA Hex Full Nut in zinc plated steel. General application.
- 2BA Hex Nyloc Full Nut in zinc plated steel. General application.
- 2BA Brass Chromed Domed Nut
- 1/4" BSF Hex C/F Full Nut in zinc plated steel. Morris1000 and general application
- 1/4" UNF Hex C/F Full Nut in zinc plated steel. General application
- 1/4" UNF Hex Full nut in A2 stainless steel. General application.
- 1/4" UNF Hex Nyloc Full Nut in zinc plated steel. General application
- 1/4" UNF Hex Nyloc Full Nut in stainless steel. General application
- 1/4" UNF Domed Nut in Stainless Steel
- 5/16" UNF Hex Full Nut in zinc plated steel. General application.
- 5/16" UNF Hex All Metal Locking Nut in zinc plated steel. General application.
- 5/16" UNF Hex Nyloc Full Nut in stainless steel. General application.
- 5/16" UNF Brass Chromed Domed Nut
- 5/16" UNF Domed Nut in Stainless Steel
- 1/4" UNC Hex C/F Full Nut in zinc plated steel. General application
- 5/16" UNC Hex C/F Full Nut. General application.
- 3/8" UNF Hex C/F Locknut in zinc plated steel. Ford Cortina MK11 Steering gear and general application.
- 5/8" UNF Locknut. Ford Cortina Mk3 Front Hub. General application.
- 7/16" UNF Slotted Nut-Deep in zinc plated steel. Ford Cortina MK11 Steering Gear and general application.
- 9/16" UNF Nyloc Full Nut in zinc plated steel. General application.
- M4 Hex nut with FS conical washer. General application.
- M4 Full nut in zinc plated steel. General application.
- M4 Nyloc nut in zinc plated steel. General application.
- M5 Hex nut with FS conical washer. General application.
- M5 Full nut in zinc plated steel. General application.
- M5 Domed Nut in stainless steel. General application.
- M6 Full nut in Zinc plated steel. General application.
- M6 Full nut in Stainless Steel. General application.
- M6 Nyloc nut in zinc plated steel. General application.
- M6 Nyloc nut in stainless steel. General application.
- M6 Hex nut with FS conical washer. General application.
- M6 Domed Nut in stainless steel. General application.
- M6 Domed Nyloc Nut in zinc plated steel. Ferrari and general application.
- M7 Full nut in Zinc plated steel. General application.
- M8 Full nut in Zinc plated steel. General application.
- M8 Domed Nut in stainless steel. General application.
- M8 Domed Nyloc Nut in zinc plated steel. Ferrari and general application.
- M8 Hex nut with FS conical washer. General application.
- M12 x 1.5 Hex C/F Locknut in zinc plated steel. General application.
- M12 x 1.75 Hex C/F Locknut in zinc plated steel. Ford Cortina MK11 and general application.
- Rivnut Inserts
- Rivnut - 6-32 UNC thread size, panel hole 17/64" (6.75mm)
- Rivnut - 8-32 UNC thread size, panel hole 17/64" (6.75mm)
- Rivnut -10-24 UNC thread size, panel hole 19/64" (7.6mm)
- Rivnut -1/4" UNC thread size, panel hole 3/8" (9.5mm)
- M5 Round nut for 7.0mm panel hole. AC Aceca.
- Rivnut - Splined M4 thread size, panel hole 6.0mm
- Rivnut - Splined M5 thread size, panel hole 7.0mm. General application.
- Rivnut - Splined M6 thread size, panel hole 9.5mm. General application.
- Rivnut - Splined M8 thread size, panel hole 10.5mm. General application.
- Rivnut - Hex M4 thread size, panel hole 5.90mm Hex. General application.
- Rivnut - Hex M5 thread size, panel hole 6.90mm Hex. General application.
- Rivnut - Hex M6 thread size, panel hole 8.90mm Hex. General application.
- Rivnut - Hex M8 thread size, panel hole 10.90mm Hex. General application.
- Rivnut - Hex M10 thread size, panel hole 12.90mm Hex. General application.
- Square Nuts
- 1/4"UNF x 7/16"AF Square nut in zinc plate. Triumph and general application.
- 1/4"UNC x 7/16"AF Square nut in zinc plate. General application.
- 5/16"UNF x 9/16"AF Square nut in zinc plate. General application.
- Twin Nuts
- M4 Twin Nut; flat, countersunk, slotted in zinc plated steel. General application.
- M5 Twin Nut; flat, countersunk, slotted in zinc plated steel. General application.
- M6 Twin Nut; flat, countersunk, slotted in zinc plated steel. General application.
- Wing Nuts
- M5 Wing Nut in zinc plated steel. General application.
- M6 Wing Nut in zinc plated steel. General application.
- M8 Wing Nut in zinc plated steel. General application.
- M10 Wing Nut in zinc plated steel. General application.
- 3/16" UNC/BSW Wing Nut in zinc plated steel. General application.
- 1/4" UNF Wing Nut in zinc plated steel. General application.
- 1/4" UNC/BSW Wing Nut in zinc plated steel. General application.
- 5/16" UNC/BSW Wing Nut in zinc plated steel. General application.
- 3/8" UNC/BSW Wing Nut in zinc plated steel. General application.
- Round Nuts
- 3/8" x 3/4" Chrome Round Map/Wiper Switch Bezel - slotted. General application.
- 7/16" x 3/4" Chrome Round H/Lamp Switch Bezel - slotted. General application.
- 9/16" x 3/4" Chrome Round Toggle Switch Bezel - slotted. General application.
- 'R' Clips and Linch Pins
- R' Clip
- R' Clip
- R' Clip
- R' Clip
- R' Clip
- R' Clip
- Linch Pin
- Linch Pin
- Linch Pin
- Linch Pin. JCB Type
- Linch Pin. (Safety) JCB Type
- Screws in Stainless Steel
- Phillips Self-Tapping Screws
- No.6 x 1/2" screw: raised, countersunk, Phillips head in stainless steel. General application
- No.6 x 3/4" screw: raised, countersunk, Phillips head in stainless steel. General application
- No.6 x 1" screw: raised, countersunk, Phillips head in stainless steel. General application
- No.8 x 1/2" screw: raised, countersunk, Phillips head in stainless steel. General application
- No.8 x 3/4" screw: raised, countersunk, Phillips head in stainless steel. General application
- No.8 x 1" screw: raised, countersunk, Phillips head in stainless steel. General application
- Posidriv Self-Tapping Screws
- No.6 x 1/2" screw: flat, countersunk, posidriv head in stainless steel. General application.
- No.6 x 3/4" screw: flat, countersunk, posidriv head in stainless steel. General application.
- No.6 x 1/2" screw: pan-headed, posidriv, self-tapping in stainless steel. General application.
- No.6 x 5/8" screw: pan-headed, posidriv, self-tapping in stainless steel. General application.
- No.6 x 3/4" screw: pan-headed, posidriv, self-tapping in stainless steel. General application.
- No.6 x 3/8" screw: flanged, posidriv head in stainless steel. General application.
- No.6 x 1/2" screw: flanged, posidriv head in stainless steel. General application.
- No.6 x 5/8" screw: flanged, posidriv head in stainless steel. General application.
- No.6 x 3/4" screw: flanged, posidriv head in stainless steel. General application
- No.6 x 5/8" screw: raised, countersunk, posidriv head in stainless steel. General application
- No.8 x 1/2" screw: pan-headed, posidriv in stainless steel. General application.
- No.8 x 5/8" screw: pan-headed, posidriv in stainless steel. General application.
- No.8 x 3/4" screw: pan-headed, posidriv in stainless steel. General application.
- No.8 x 3/4" screw: flanged, pozidriv head, in stainless steel. General application.
- No.8 x 1" screw: flanged, posidriv, self-tapping in stainless steel. General application.
- No.8 x 1/2" screw: raised, countersunk, posidriv, in stainless steel. General application.
- No.8 x 3/4" screw: raised, countersunk, posidriv, self-tapping in stainless steel. General application.
- No.8 x 1" screw: raised, countersunk, posidriv, self-tapping in stainless steel. General application.
- No.10 x 5/8" screw: countersunk, posidriv in stainless steel. Morris 1000 door handle and general application
- No.10 x 1/2" screw: pan-headed ,posidriv, self-tapping in stainless steel. General application.
- No.10 x 5/8" screw: pan-headed ,posidriv, self-tapping in stainless steel. General application.
- No.10 x 3/4" screw: pan-headed ,posidriv, self-tapping in stainless steel. General application.
- No.10 x 1" screw: pan-headed, posidriv, self-tapping in stainless steel. General application.
- No.10 x 1/2" screw: domed, flanged, posidriv head in stainless steel. General application.
- No.10 x 3/4" screw: domed, countersunk, posidriv head in stainless steel. General application.
- No.12 x 1/2 " screw: pan-headed, posidriv self-tapping in stainless steel. General application.
- No.14 x 1/2 " screw: pan-headed, posidriv self-tapping in stainless steel. Mini Van/Traveller petrol tanks and general application.
- No.14x 1" screw: pan-headed, posidriv, self-tapping in stainless steel. Mini Van/Traveller petrol tanks and general application.
- Slotted Self-Tapping Screws
- No.4 x 3/8" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.4 x 1/2" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.4 x 5/8" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.4 x 3/4" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.4 x 1" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.4 x 1/4" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.4 x 3/8" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.4 x 1/2" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.4 x 5/8" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.4 x 3/4" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.6 x 3/8" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.6 x 1/2" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.6 x 3/4" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.6 x 1" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.6 x 1.1/2" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.6 x 3/4" woodscrew: raised, countersunk, slotted head in stainless steel. General application.
- No.6 x 3/8" screw: countersunk, slotted head in stainless steel. General application.
- No.6 x 1/2" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.6 x 5/8" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.6 x 1" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.6 x 1.1/2" screw: raised, countersunk, slotted head in stainless steel. General application.
- No.8 x 3/8" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.8 x 1/2" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.8 x 3/4" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.8 x 1" screw: pan-headed, slotted self-tapping in stainless steel. General application.
- No.8 x 1/2" screw: raised, countersunk, slotted, self-tapping in stainless steel. General application.
- No.8 x 3/4" screw: raised, countersunk, slotted, self-tapping in stainless steel. Mini headlamp surround and general application.
- No.8 x 1" screw: raised, countersunk, slotted, self-tapping in stainless steel. General application.
- No.8 x 1.1/2" screw: raised, countersunk, slotted, self-tapping in stainless steel. General application.
- No.10 x 3/4" screw: pan-headed, slotted, self-tapping in stainless steel. General application.
- No.10 x 1" screw: pan-headed, slotted, self-tapping in stainless steel. General application.
- No.10 x 1.1/4" screw: raised, countersunk, slotted, self-tapping in stainless steel. General application.
- No.10 x 1.1/2" screw: raised, countersunk, slotted, self-tapping in stainless steel. General application.
- No.12 x 1" screw: domed, countersunk, slotted in stainless steel. General application.
- Machine Screws in Stainless Steel (Imperial)
- Machine Screws in Stainless Steel (Imperial) - Cap Head
- 1/4"UNC x 1" Cap Head, Socket, Set Screw in stainless steel. General application.
- 1/4"UNC x 1.1/4" Cap Head, Socket, Set Screw in stainless steel. General application.
- Machine Screws in Stainless Steel (Imperial) - Phillips
- 8-32UNC x 1/2" screw: Phillips, pan headed, in stainless steel. General application.
- 1/4UNC x 1" screw: Phillips, flat, countersunk in stainless steel. General application.
- 10-32UNF x 1/2" screw: Phillips, flat, countersunk in stainless steel. General application.
- 10-32UNF x 3/4" screw: Phillips, flat, countersunk in stainless steel. General application.
- Machine Screws in Stainless Steel (Imperial) - Posidriv
- 10/32 UNF x 3/4" screw: posidriv, pan-head in stainless steel. General application.
- 6/32UNC x 1" screw: posidriv, pan-head in stainless steel. General application.
- 8/32UNC x 1/2" screw: pozidriv, pan-headed, in stainless steel. Ford lights and general application.
- Machine Screws in Stainless Steel (Imperial) - Slotted
- 8/32UNC x 3/4" screw: slotted, pan-head in stainless steel. General application.
- 8/32UNC x 3/4" screw: slotted, countersunk in stainless steel. General application.
- 8/32UNC x 1.1/2" screw: slotted, pan-head in stainless steel. General application.
- 6BA x 7/8" screw: raised, countersunk, slotted in stainless steel. General application.
- 2BA x 3/8" screw: round-head, slotted in stainless steel. General application.
- 2BA x 5/8" screw: round-head, slotted in stainless steel. General application.
- 2BA x 5/8" screw: flat, countersunk, slotted in stainless steel. General application.
- 2BA x 5/8" screw: raised, countersunk, slotted in stainless steel. General application.
- 2BA x 3/4" screw: round-head, slotted in stainless steel. General application.
- 2BA x 3/4" screw: flat, countersunk, slotted in stainless steel. General application.
- 2BA x 3/4" screw: raised, countersunk, slotted in stainless steel. General application.
- 2BA x 1" screw: flat, countersunk, slotted in stainless steel. General application.
- 2BA x 1" screw: raised, countersunk, slotted in stainless steel. General application.
- 2BA x 1" screw: cheese head, slotted in stainless steel. General application.
- Machine Screws in Stainless Steel (Metric)
- Machine Screws in Stainless Steel (Metric) - Carriage Bolt
- M6 x 25mm carriage bolt in stainless steel. General application.
- Machine Screws in Stainless Steel (Metric) - Phillips
- Machine Screws in Stainless Steel (Metric) - Posidriv
- M4 x 20mm screw: posidriv, pan-head in stainless steel. General application.
- M4 x 25mm screw: posidriv, pan-head in stainless steel. General application.
- M5 x 8mm screw: pozidriv, pan-headed in stainless steel. General application.
- M5 x 12mm screw: raised, countersunk, posi in stainless steel. General application.
- M5 x 16mm screw: raised, countersunk, posi in stainless steel. General application.
- M5 x 20mm screw: raised, countersunk, posi in stainless steel. General application.
- M6 x 20mm screw: posidriv, pan-head in stainless steel. Ford number plate screw and general application.
- M6 x 50mm screw: flat, posidriv, countersunk in stainless steel. General application.
- Machine Screws in Stainless Steel (Metric) - Slotted
- M5 x 10mm screw: pan-headed, slotted in stainless steel. General application.
- M5 x 10mm screw: raised, countersunk, slotted in stainless steel. General application.
- M5 x 12mm screw: raised, countersunk, slotted in stainless steel. General application.
- M5 x 16mm screw: raised, countersunk, slotted in stainless steel. General application.
- M5 x 20mm screw: raised, countersunk, slotted in stainless steel. General application.
- M5 x 25mm screw: raised, countersunk, slotted in stainless steel. General application.
- Machine Screws in Stainless Steel (Metric) - Socket Head
- M5 x 12mm screw: flat, countersunk, hex-socket head in stainless steel. General application.
- M5 x 20mm screw: flat, countersunk, hex-socket head in stainless steel. General application.
- M5 x 25mm screw: flat, countersunk, hex-socket head in stainless steel. General application.
- Screws in Steel (Self Colour/Zinc/Chrome Plated)
- Posidriv Self-Tapping Screws
- No.6 x 5/8" screw: countersunk, posidriv, self-tapping in zinc plated steel with yellow passivate. General application.
- No.6 x 1" screw: countersunk, posidriv, self-tapping in zinc plated steel. General application.
- No.6 x 3/8" screw: raised, countersunk, posidriv, self-tapping in zinc plated steel . General application.
- No.12 x 3/4" screw: pan-headed, self-tapping, posidriv in steel. General application.
- No.12 x 1" screw: pan-headed, self-tapping, posidriv in steel. General application.
- Slotted Self-Tapping Screws
- Machine Screws in Steel (Self Colour/Zinc/Chrome Plated) (Imperial)
- Machine Screws in Steel (Self Colour,/Zinc/Chrome Plated) (Imperial) - Cap Head
- 1/4"UNF x 1" Cap Head, Socket, Set Screw in Zinc Plated Steel. General application.
- 5/16"UNF x 1" Cap Head, Socket, Set Screw in Zinc Plated Steel. General application.
- Machine Screws in Steel (Self Colour/ Zinc/Chrome Plated) (Imperial) - Posidriv
- 2BA x 3/4" screw: countersunk, pozi head, in zinc plated mild steel. General application.
- 2BA x 3/4" screw: pozi, Fillister head, in Chrome plated mild steel. Morris 1000 window winder handle and general application.
- 2BA x 1.1/4" screw: pozi, Fillister head, in Chrome plated mild steel. Morris 1000 inner door handle and general application.
- 1/4" UNF x 1" screw: countersunk, pozi head, in zinc plated mild steel with locking patch. Lock assemblies and general application.
- 1/4" UNF x 1" screw: pozi-pan head, in zinc plated mild steel. General application.
- 1/4" UNF x 1.1/4" screw: raised, countersunk, pozi head, in zinc plated mild steel. General application.
- 1/4" BSF x 5/8" screw: countersunk, c/pnt, pozi head, in zinc plated mild steel. Morris 1000 lock assembly and general application.
- 5/16" UNF x 1" screw: raised, countersunk, c/pnt, posidriv head in zinc plated mild steel. MGB, Mini hinges and general application.
- 5/16" BSF x 15/16" screw: countersunk, c/pnt, posidriv head in zinc plated mild steel. General application.
- Machine Screws in Steel (Self Colour/ Zinc/Chrome Plated) (Imperial) - Slotted
- 1/4" UNF x 3/8" screw: 82%, countersunk, slotted head, in zinc plated mild steel. Brake drum and general application.
- 1/4" UNC x 3/4" screw: pan, slotted head, in zinc plated mild steel. General application.
- 1/4" UNC x 1.1/4" screw: pan, slotted head, in zinc plated mild steel. General application.
- Machine Screws in Steel (Self Colour/Zinc/Chrome Plated) (Metric)
- Screws- Black
- No.6 x 1/2" self-tapping screw. Pozi-pan in black. General application.
- No.6 x 1/2" self-tapping screw. Posidriv-flanged head in black. General application.
- No.6 x 1" self-tapping screw. Posidriv-flanged head in black. General application.
- No.6 x 3/4" self-tapping screw. Posidriv, flat, countersunk head in black. General application.
- No.6 x 1/2" self-tapping screw. Posidriv, raised, countersunk head in black.
- No.6 x 3/4" self-tapping screw. Posidriv, raised, countersunk head in black.
- No.8 x 1/2" self-tapping screw. Pozi-pan in black. General application.
- No.8 x 1/2" self-tapping screw. Posidriv, raised, countersunk head in black. General application.
- No.8 x 1/2" self-tapping screw. Posidriv-flanged, in black. General application.
- No.8 x 3/4" self-tapping screw. Posidriv, raised, countersunk head in black. General application.
- No.8 x 3/4" self-tapping screw. Posidriv-flanged, in black. General application.
- No.10 x 5/8" self-tapping screw. Posidriv, pan-headed in black. General application.
- No.10 x 1/2" self-tapping screw. Posidriv-flanged head in black. General application.
- No.10 x 3/4" self-tapping screw. Posidriv-flanged head in black. General application.
- No.10 x 1" self-tapping screw. Posidriv-flanged head in black. General application.
- No.10 x 1/2" self-tapping screw. Posidriv, raised, countersunk head in black. General application.
- No.10 x 3/4" self-tapping screw. Posidriv, raised, countersunk head in black. General application.
- No.10 x 1" self-tapping screw. Posidriv, raised, countersunk head in black. General application.
- 1/4" UNF x 1" pozidriv-pan head in black. General application.
- 10UNF x 1 3/4" Machine Screw in Black. Rover P5/5B and general application.
- 2BA x 2 1/2" Slotted, cheese headed machine screw. General application.
- M5 x 16.0mm pan head, posidriv in steel. Black in colour. Ford range and general application.
- M6 x 20.0mm pan head, posidriv in steel. Black in colour. General application
- Screws- ACME Thread
- 1/4 ACME x 1/2" Hex Headed Screw in zinc plated mild steel. Triumph Stag and general application.
- 1/4 ACME x 3/4" Raised, Countersunk, Slotted Screw in zinc plated mild steel, used with SNJ1761. Triumph TR4/5/6 and general application.
- Snap-In Nuts- Nylon / Rubber
- Nylon snap-in nut for 9/32" (7mm) square hole and used with No.6 self-tapping screw. Panel thickness 0.8-2.4mm. Rolls Royce and general application.
- Nylon snap-in nut for 9/32" (7mm) square hole and used with No.6 self-tapping screw. Panel thickness 0.8-2.4mm. General application.
- Nylon snap-in nut for 6.9mm square hole and used with No.6 self-tapping screw. Panel thickness 0.8-2.4mm. Ford, Jaguar and general application.
- Nylon snap-in nut for 1/4" square hole and used with No.6-8 self-tapping screw. Panel thickness0.8-3.2mm. General application.
- Nylon snap-in nut for 17/64" (6.8mm) square hole and use with No.8 or 10 self tapping screws. Mini headlamp and general application.
- Nylon snap-in nut for 17/64" (6.8mm) square hole and use with No.10 self tapping screw. Ford Capri MK2/3 Front No. Plate mounting and general application.
- Nylon snap-in nut for 3/8" square hole and use with No.12 or 14 self tapping screws. RollsRoyce/Bentley,Triumph, Mini petrol tanks and general application.
- Nylon snap-in nut with spacer head for 3/8" square hole and use with No.12 or 14 self tapping screws. Mini Van and Estate petrol tanks.
- Nylon snap-in nut for 9/32" square hole and use with No8 or 10 self-tapping screw. Panel thickness 0.8-4.0mm. General application.
- Nylon snap-in nut for 9/32" square hole and use with No8 or 10 self-tapping screw. Ford and general application.
- Nylon snap-in nut for 9.5mm round hole and used with No.8 or 10 self-tapping screw. VW and general application
- Nylon snap-in nut for 6.5mm square hole and used with No.8 or 10 self-tapping screw. Fiat, Alpha Romeo and general application
- Nylon snap-in nut for 9.4mm square hole and use with No.10 self-tapping screw. Rover and general application.
- Nylon snap-in nut for 10.0mm round hole and used with No.8 or 10 self-tapping screw. VW, Audi and general application
- Nylon snap-in nut for 10.7mm square hole and used with 8mm (5/16") screw. Triumph Stag Hardtop.
- Nylon snap-in nut, suits VW, Audi
- Nylon snap-in nut, suits VW, Audi
- Nylon snap-in nut, suits VW, Audi
- Nylon snap-in nut, suits VW, Audi
- Nylon snap-in nut, suits Vauxhall
- Nylon snap-in nut, suits Vauxhall
- Nylon snap-in nut, suits Vauxhall
- Nylon snap-in nut, suits Vauxhall
- Nylon snap-in nut, suits BMW
- Nylon snap-in nut, suits BMW
- Angled Nylon snap-in nut for 3/8" x 31/64" square hole and use with No.12 or 14 self-tapping screw. BL, Rover, Triumph and general application.
- Captive nut, No.12-14 self-tapping screw size, head size 20.4mm x 14.0mm, square panel hole 3/8"x3/8". Rover, Triumph.
- Grille fix used with No.10 self tapping screw or BSF122. Ford Capri, Escort, Cortina and Granada
- M5 Rubber Well Nut. Panel hole dia. 9.0mm.
- M6 Rubber Well Nut. Panel hole dia. 12.3mm.
- Spire Nuts
- Spire Nuts- Weld/Cage type (including 'J' Type)
- Cage Nuts (including 'J' Type)
- Cage nut with 10-32UNF thread size, panel thickness 0.028-0.064". Triumph TR2/3/3A and general application.
- Cage nut with 2BA thread size, panel thickness 0.072-0.104". General application.
- Cage nut with 1/4" UNF thread size, panel thickness 0.028-0.064". General application.
- J' Type Cage Nut, 1/4" UNF thread size, standard reach, panel thickness 0.036-0.064". General application.
- Cage nut with 5/16" UNF thread size, panel thickness 0.028-0.064". Triumph and general application.
- J' Type Cage Nut, 5/16" UNF thread size, standard reach, panel thickness 0.036-0.064". General application
- Cage nut with M4 thread size, panel thickness 0.71-1.63mm. General application.
- Cage nut with M4 thread size, panel thickness 1.83-2.64mm. General application.
- Cage nut with M5 thread size, panel thickness 0.71-1.63mm. General application.
- M5 Front Loading Cage Nut.
- J' Type Cage Nut, M5 thread size, standard reach, panel thickness 0.91-1.62mm. General application.
- J' Type Cage Nut, M5 thread size, short reach, panel thickness 0.63-1.22mm. General application.
- Cage nut with M6 thread size. Panel thickness 0.71-1.63mm. General application.
- J' Type Cage Nut, M6 thread size, short reach, panel thickness 1.63 - 2.64mm. General application.
- J' Type Cage Nut, M6 thread size, standard reach, panel thickness 0.91-1.62mm. General application.
- Cage nut with M8 thread size, panel thickness 0.71-1.63mm. General application.
- Cage nut with M8 thread size, panel thickness 3.34-4.7mm. Ford Cortina, Granada bumper and general application.
- Cage nut with M10 thread size, panel thickness 1.83-2.64mm. General application.
- J' Type Cage Nut, M10 thread size, standard reach, panel thickness 1.65-3.25mm. General application.
- Cage nut with M12 x 1.75mm thread size. Panel thickness 3.3 - 4.7mm. Quarry plant and general application.
- J' Type Cage Nut, M12 thread size, standard reach, panel thickness 5.6-6.3mm. Quarry plant and general application.
- Weld Cage/Flat Nuts
- Weld Cage for 7/16"AF Square Nut. Triumph and general application.
- Weld Cage for 5/8"AF Square Nut. General application.
- Weld Flat Nut for No.10 self-tapping screw. General application.
- Spire Nuts- 'J' type
- No6 'J' nut, length 16.8mm, width 11.2mm, panel range 0.61-1.02mm. General application.
- No6 'J' nut, length 16.5mm, width 11.2mm, panel range 1.22-1.63mm. General application.
- No8 'J' nut, length 16.8mm, width 11.2mm, panel range 0.71-1.2mm. General application.
- No8 'J' nut, length 16.5mm, width 11.2mm, panel range 1.42-1.83mm. General application.
- No10 'J' nut, length 19.0mm, width 12.9mm. General application.
- No12 'J' nut, length 25.0mm, width 15.0mm. General application.
- J' nut for 1/4" Acme thread - standard reach. General application.
- Spire Nuts- 'U' type (Click on Photo for more info)
- U' nut for No.4 self-tapping screw. General application.
- U' nut for No.6 self-tapping screw. Used on Minor 1000 glove box and general application.
- U' nut for No.6 self-tapping screw. Triumph, Unipart, and general application.
- U' nut for No.6 self-tapping screw. General application.
- U' nut for No.6 self-tapping screw. General application.
- U' nut for No.8 self-tapping screw. Triumph and general application.
- U' nut for No.8 self-tapping screw. General application.
- U' nut for No.8 self-tapping screw. Length 14.6mm, width 12.8mm in stainless steel. General application.
- U' nut for No.8 self-tapping screw. Triumph, general application.
- U' nut for No.8 self-tapping screw, in Stainless Steel. Unipart, general application.
- U' nut for No.8 self-tapping screw. Unipart, general application.
- U' nut for No.8 self-tapping screw. General application.
- U' nut for No.8 self-tapping screw. Length 16.5mm, width 8.6mm. General application and Ford Escort.
- U' nut with prevailing torque for No.8 self-tapping screw. Length16.5mm, width 11.2mm. General application.
- U' nut for No.10 self-tapping screw. General application.
- U' nut for No.10 self-tapping screw, standard reach. General application.
- U' nut for No.10 self-tapping screw, length 19.6mm, width 12.7mm, panel range3.17mm-3.42mm. General application.
- U' nut for No.10 self-tapping screw, length 19.6mm, width 12.7mm, panel range 3.17mm-3.42mm in stainless steel. General application.
- U' nut for No.12 self-tapping screw. Length 26mm, width 15mm. Rover and general application.
- U' nut for No.12 self-tapping screw in stainless steel. Length 26mm, width 15mm. General application.
- U' nut for No.14 self-tapping screw . Length 24.70mm, width 16.3mm. Jaguar, Mercedes and general application.
- Spire Nuts- expansion / flat/ cal/ lug/ anchor/rt angled
- Right Angled Panel Clip for No.8 screw. General application.
- Rectangular Wood Anchor for No.10 screw. General application.
- Latching/Wing Mounting Nut (Green). Volvo Amazon, Vauxhall Velox, Austin Metropolitan, and general application.
- Expansion nut for No. 6 self tapping screw and assembly in 21/64" square hole. General application.
- Expansion nut for No. 8 self tapping screw and assembly in 13/32" square hole. General application.
- Expansion nut for No. 10 self tapping screw and assembly in 33/64" square hole. General application.
- Rectangular flat nut for No. 6 screw. General application.
- Rectangular flat nut for No. 8 screw. General application.
- Rectangular flat nut for No. 10 screw. General application.
- Rectangular flat nut for No. 10 screw in stainless steel. General application.
- M4 Round screw retainer. General application.
- M4 Cal nut retainer. Length 15.46mm,width 10.0mm and panel range 0.4-0.6mm. General application.
- M5 Cal nut retainer. Length 20.5mm,width 14.0mm and panel range 0.4-0.6mm. General application.
- M6 Cal nut retainer. Length 23.5mm, width 16.0mm and panel range 0.4-0.6mm. General application.
- M8 Cal nut retainer. Length 24.6mm, width 16.8mm and panel range 0.6-3.0mm. General application.
- M6 Lug nut retainer. Length 23.0mm, width 12.60mm and panel thickness 0.8-4.0mm, in Stainless Steel. General application.
- M6 Lug nut retainer. Length 24.0mm, width 14.2mm and panel thickness 0.8-4.0mm. General application.
- M6 Lug nut retainer (Extended Length). Length 30.40mm, width 14.55mm and panel thickness 0.8-4.0mm. General application.
- M8 Lug nut retainer. Length 26.4mm, width 14.5mm and panel thickness 0.8-4.0mm. General application.
- Threaded Bar - UNC, UNF
- Threaded Bar - 1/4" UNC. Sold in 1ft lengths. General application.
- Threaded Bar - 5/16" UNC. Sold in 1ft lengths. General application.
- Threaded Bar - 3/8" UNC. Sold in 1ft lengths. General application.
- Threaded Bar - 1/4" UNF. Sold in 1ft lengths. General application.
- Threaded Bar - 5/16" UNF. Sold in 1ft lengths. General application.
- Threaded Bar - 3/8" UNF. Sold in 1ft lengths. General application.
- Washers - Flat/Spring/Cup/S-Proof/Tab - Metal/Plastic/Rubber/Fibre
- Flat Washers
- 2BA x 3/4" OD Washer in zinc plated steel. General application.
- 1/4" x 9/16" OD Washer in zinc plated steel. General application.
- 1/4" x 3/4" OD Washer in zinc plated steel. Mini petrol tanks and general application.
- 1/4" x 1" OD Washer in zinc plated steel. General application.
- 5/16" x 5/8" OD Wavey Washer in stainless steel. General application.
- 5/16" x 13/16" OD Washer in stainless steel. Triumph and general application.
- 5/16" x 7/8" OD Washer in zinc plated steel. General application.
- 5/16" x 11/16" OD Wavey Washer in phosphate steel. Triumph and general application.
- M5 x 10mm OD Washer in stainless steel. General application.
- M5 x 20mm OD Washer in zinc plated steel. General application.
- M6 x 30mm penny washer in stainless steel. General application.
- M8 x 21mm OD Washer, 0.94mm thick, in zinc plated steel. General application.
- M16 x 30mm OD Washer, 2.8mm thick, DIN125A, in zinc plated steel. General application.
- Rubber Washer 20mm diameter, hole 6.5mm, thickness 3.0mm. General application.
- White nylon washer 12.7x 1.6mm with 6.4mm hole size. General application.
- Oval/Square Washers
- 5/16" Rect. Washer in zinc plated steel. MGB/C wing fixing and general application.
- Shakeproof Washers
- 3/16" ID x 3/8" OD S/Proof Washer- Internal Teeth. General application.
- 1/4" ID x 1/2" OD S/Proof Washer- Internal Teeth. General application.
- 5/16" ID x 9/16" OD S/Proof Washer- Internal Teeth. General application.
- 3/8" ID x 11/16" OD S/Proof Washer- Internal Teeth. General application.
- 7/16" ID x 25/32" OD S/Proof Washer- Internal Teeth. General application.
- 1/2" ID x 7/8" OD S/Proof Washer- Internal Teeth. General application.
- 5/8" ID x 1" OD S/Proof Washer- Internal Teeth. General application.
- 5/8" ID x 1" OD S/Proof Washer- External Teeth. General application.
- Spring Washers
- 2BA spring washer in zinc plated steel. General application
- 1/4" UNF spring washer in zinc plated steel. General application
- 1/4" UNF spring washer in stainless steel. General application.
- 5/16" UNF spring washer in zinc plated steel. General application.
- 5/16" UNF spring washer in stainless steel. General application.
- M5 spring washer in stainless steel. General application.
- M6 spring washer in stainless steel. General application.
- M8 spring washer in stainless steel. General application.
- M10 spring washer in stainless steel. General application.
- Box of Assorted Spring Washers - Imperial. 800 Pieces
- Box of Assorted Spring Washers - Metric (M5-M20). 1015 Pieces
- Box of Assorted Stainless Steel Spring Washers (M5-M10). 650 Pieces
- Cup Washers
- No4 cup washer (countersunk) in Stainless Steel. General Application.
- No6 cup washer (countersunk) in Nickel Plated Brass. General Application.
- No6 cup washer (countersunk) in Black Brass. General Application.
- No8 cup washer (countersunk) in Nickel Plated Brass. General Application.
- No6 cup washer (flanged), rolled, in stainless steel. General Application.
- No6 cup washer (flanged), in stainless steel. General Application.
- No10 cup washer (flanged), solid, black burnished . General Application.
- M5 cup washer (flanged) in stainless steel. General application.
- Fibre/Leather Washers
- Fibre Washer 13/64" ID x 3/8" OD x 1/16" thickness. General application.
- Fibre Washer 1/4" ID x 3/8" OD x 1/16" thickness. General application.
- Fibre Washer 5/16" ID x 5/8" OD x 1/16" thickness. General application.
- Fibre Washer 21/64" ID x 1/2" OD x 1/16" thickness. General application.
- Fibre Washer 11/32" ID x 9/16" OD x 1/16" thickness. General application.
- Fibre Washer 3/8" ID x 5/8" OD x 1/16" thickness. General application.
- Fibre Washer 3/8" ID x 7/8" OD x 1/16" thickness. General application.
- Fibre Washer 7/16" ID x 11/16" OD x 1/16" thickness. General application.
- Fibre Washer 29/64" ID x 11/16" OD x 1/16" thickness. General application.
- Fibre Washer 15/32" ID x 3/4" OD x 1/16" thickness. General application.
- Fibre Washer 15/32" ID x 15/16" OD x 1/16" thickness. General application.
- Fibre Washer 1/2" ID x 11/16" OD x 1/16" thickness. General application.
- Fibre Washer 1/2" ID x 3/4" OD x 1/16" thickness. General application.
- Fibre Washer 1/2" ID x 13/16" OD x 1/16" thickness. General application.
- Fibre Washer 17/32" ID x 3/4" OD x 1/16" thickness. General application.
- Fibre Washer 9/16" ID x 7/8" OD x 1/16" thickness. General application.
- Fibre Washer 37/64" ID x 7/8" OD x 1/16" thickness. General application.
- Fibre Washer 21/32" ID x 1" OD x 1/16" thickness. General application.
- Fibre Washer 23/32" ID x 1.1/8" OD x 1/16" thickness. General application.
- Fibre Washer 3/4" ID x 1.1/8" OD x 1/16" thickness. General application.
- Fibre Washer 49/64" ID x 1" OD x 1/16" thickness. General application.
- Fibre Washer 1" ID x 1.1/2" OD x 1/16" thickness. General application.
- Fibre Washer 1.13/32" ID x 1.11/16" OD x 1/16" thickness. Triumph and general application.
- Aluminium Washers
- Aluminium Washer M6 x 10mm diameter, thickness 1.0mm. General application.
- Aluminium Washer M8 x 11mm diameter, thickness 1.0mm. General application.
- Aluminium Washer M10 x 13mm diameter, thickness 1.0mm. General application.
- Aluminium Washer M10 x 14mm diameter, thickness 1.0mm. General application.
- Aluminium Washer M12 x 16mm diameter, thickness 1.5mm. General application.
- Aluminium Washer M17 x 21mm diameter, thickness 1.5mm. General application.
- Tab Washers
- Tab Washer. MGB/C GT/Roadster Front Caliper.
- Tab/Locking Washer. Ford Zephyr/Zodiac MK11/111 Rear Hub.
- Woodruff Keys
- Woodruff Keys: thickness 3/32", length1/2".
- Woodruff Keys: thickness 3/32", length 5/8". BMC Speedo drive and general application.
- Woodruff Keys: thickness 1/8", length 1/2". BMC LC39/C40 Dynamo and general application.
- Woodruff Keys: thickness 1/8", length 5/8". BMC Oilpump/Dynamo & Strg Arm and general application.
- Woodruff Keys: thickness 5/32", length 3/4". BMC Strg Arm and general application.
- Woodruff Keys: thickness 3/16", length 1".
- Woodruff Keys: thickness 3/16", length 1 1/8".
- Woodruff Keys: thickness 7/32", length 7/8".
- Woodruff Keys: thickness 7/32", length 1 1/8".
- Woodruff Keys: thickness 1/4", length 1".
- Woodruff Keys: thickness 1/4", length 1 1/8".
- Woodruff Keys: thickness 5/16", length 1 1/4".
- Woodruff Keys: thickness 3/8", length 1 1/4".
- Miscellaneous Parts
- Miscellaneous Parts
- Dashboard Finisher for Classic Mini.
- Ford Cortina MK5 ('79-'82) Bumper Clip.
- Seat Box Strap Retaining Stud (Large). Land Rover Series 1,2,2A,3 and general application.
- Headrest Bezel and Washer finished in Nickel Plate. (4 pairs in pack). Jaguar,Triumph, MGB, Mini, Rover and general application.
- Door Check Strap Holder. Lotus and general application.
- Headlamp Adjuster Screw & Mounting Clip. BLeyland, MG,Triumph and general application.
- Special retainer for door sealing strip - snap fits into 1/4" diameter hole.Minor 1000, Austin A35 and Triumph
- Sill cover fix in black. BL Allegro.
- Insonic stud M4 x 10mm BR SC
- Rare and Obsolete Clips - Please Ring for Availability
- Moulding Clip - Metal. Austin Princess wheel arch.
- Moulding Clip - Plastic. Morris Marina Moulding End Clip.
- Moulding Clip - Plastic. Ford Capri MK2/3
- Bell Crank Levers for Door Locking rods. BL, Ford, Triumph and general application.
- Measuring Gauges/Tapes/Vernier
- Measuring Gauge: Rivet/Screw/Drill - INCH/METRIC
- Tape Measure (5m) with Power Return.
- Tape Measure (10m) with Power Return.
- Pen/Pencil Clips
- Pen/Pencil Clip - Single.
- Pen/Pencil Clip - Single (Self-Adhesive)
- Pen/Pencil Clip - Double.
- Pen/Pencil Clip - Treble.
- Pen/Pencil Clip - Treble (Green)
- Pen/Pencil Clip - Treble (Purple)
- Pen/Pencil Clip - Treble (Red)
- Pen/Pencil Clip - Treble (Blue)
- Tools and Accessories
- Workshop Utility Scissors with Wire Cutters. Stainless steel blades. Ergonomic plastic handles. Supplied with belt storage pouch. Length 140mm.
- Grinding Paste with 2 Valve Grinding Sticks.
- Hook and Pickup Set. Ideal for removing and fitting O-rings, cotter pins, seals and bushes. 4 piece set
- Hex Hose Clip Tool (Flexible). Chrome Vanadium.
- Door Handle Spring Clip Remover. Extra long offset body.
- Trim Removal Tool for mouldings and badges.
- Door Pin Extractor with 3 Mandrels. Ford and general application.
- Zippy' Type Scraper , supplied with 5 x single edge steel razor blades.
- Single Edge Steel Razor Blades for 'Zippy' Type Scrapers. 15 blades
- Trimming Knife Blades: Standard/Traditional Type. 15 blades
- Plastic Filler Spreaders (105 x 70mm). General application
- Plastic Adhesive Speaders (100 x 70mm). General application
- Tool Clips
- Tool clip with back plate, in black enamel finish. Grip Dia. 1/2". General application.
- Tool clip with back plate, in black enamel finish. Grip Dia. 5/8". General application.
- Tool clip with back plate, in black enamel finish. Grip Dia. 1". General application.
- Tool clip with back plate, in black enamel finish. Grip Dia. 1.1/8". General application.
- Tool clip with back plate, in black enamel finish. Grip Dia. 1.1/4". General application.
- Tool clip, closed type, 1/2" diameter. General application.
- Moulding Clips
- Moulding Clips - Metal
- Moulding clip for 7.1mm moulding gap. Riley Elf/1.5, Vauxhall Cresta/Viscount. Used with BSF050 rivet.
- Moulding Clip for 10.0mm moulding gap. Vauxhall PA, Chrysler Avenger
- Moulding clip for a 15.0mm moulding gap and 3.2mm offset panel hole. Early Vauxhall range.
- Moulding clip for a 7.2mm moulding gap. Ford Escort Mk1 window finisher moulding.
- Moulding Clip for 8.8mm moulding gap. BL Marina wheel arch and Mini.
- Moulding Clip for 14.8mm moulding gap. Hillman Hunter
- Moulding Clip for 14.8mm moulding gap. Rover P5/5B body side moulding
- Moulding Clip for a 16.7mm moulding gap. Vauxhall range.
- Moulding Clip for 19.2mm moulding gap. Standard Vanguard and general application.
- Moulding Clip for 22.8mm moulding gap. Humber Sceptre MK1/2, Hillman Hunter/Minx and general application.
- Moulding Clip for the rear lower moulding on the Triumph Stag Hardtop (back). Used with BSF050.
- Moulding Clip - Backing plate and spring clip. Jowett Javelin.
- Moulding Clip for a 11.3mm moulding gap.Vauxhall Velox/ Victor VX4/90.
- Moulding Clip for a 19.8mm moulding gap. Vauxhall Velox (1951-57)
- Moulding Clip Innocenti Spider 950/S ('62-'66).
- Moulding Clip Ferrari 330GT/GTC/GTS and general application.
- Moulding Clip. Jensen Interceptor, Volvo 1800 (Jensen)
- Moulding Clip for a 7.9mm moulding gap and 5mm panel hole. Austin Mini Cooper 'S', Riley Elf, Wolseley Hornet.
- Moulding Clip for Door Window Surround. Austin Mini Cooper 'S' MK1, Riley Elf, Wolseley Hornet.
- Round 'Tuckers' moulding clip for 18.5mm moulding gap and 3.2mm panel hole. Humber Super Snipe Series1V/V/Imperial, Austin 1300GTand general application.
- Round 'Tuckers' moulding clip for 15.8mm moulding gap and 3.2mm panel hole. Austin Maxi MK11 and general application.
- Round 'Tuckers' moulding clip for 14.2mm moulding gap and 3.2mm panel hole. Early Fords, Triumph, Sunbeam Alpine and general application.
- Round 'Tuckers' moulding clip for 11.7mm moulding gap and 3.2mm panel hole. Ford Zodiac MK3, Triumph Stag, Austin 1100/1300, Cambridge and general application
- Round 'Tuckers' moulding clip for 11.3mm moulding gap and 3.2mm panel hole. MG, Hillman Minx, Singer Vogue, and general application.
- Round 'Tuckers' moulding clip for 9.6mm moulding gap and 3.2mm panel hole. Ford Cortina MK1, Austin Maxi/Marina and general application.
- Round 'Tuckers' moulding clip for 9.15mm moulding gap and 3.2mm panel hole. Ford Cortina MK1 GT and general application.
- Round 'Tuckers' moulding clip for 7.9mm moulding gap and 3.2mm panel hole. Austin Mini Cooper 'S', Riley Elf, Wolseley Hornet, Hillman Super Minx.
- Round 'Tuckers' moulding clip for 7.9mm moulding gap and 3.2mm panel hole - longer version. Hillman Super Minx and general application.
- Round 'Tuckers' moulding clip for 7.0mm moulding gap and 3.2mm panel hole. Jaguar, Vauxhall, also Triumph Stag Hardtop (front) in metal (for plastic see 72650)
- Backplate for 2-piece moulding clip 3/4" x 1 1/4" used with 14190. General application.
- Moulding Clip for the leading edge of bonnet. Triumph Herald 13/60 and Vitesse
- Moulding Clip. Triumph GT6 MK1 Wing, 2000MK1 Roof and Boot, Ford Anglia 105E Roof and general application.
- Moulding Clip for the rear panel/boot on Triumph Spitfire/GT6, Dolomite
- Moulding Clip for the rear roof/quarter panel. Hillman Imp, Vauxhall Viva HA and general application.
- Moulding Clip - Ford Cortina MK1 Headlamp Surround/Embellisher.
- V' spring moulding clip. Austin Cambridge and general application.
- V' spring moulding clip. Austin Cambridge and general application.
- Moulding Clips - Plastic
- Moulding clip for 5.5mm moulding gap and 4.4mm panel hole. Mini Estate.
- Moulding clip for a 6.5mm moulding gap and 4.0mm panel hole. Vauxhall Chevette.
- Moulding clip for 6.5mm moulding gap and 5.0mm panel hole. Triumph Dolomite, Vauxhall Victor and general application.
- Moulding clip for 6.5mm moulding gap and 6.5mm panel hole. General application.
- Moulding clip for 7.1mm moulding gap and 4.8mm panel hole. Triumph Dolomite, 2000, and Hillman Imp.
- Moulding clip for 7.1mm moulding gap and a 4.8mm panel hole. Triumph, Austin. Triumph Stag Hardtop (front) in plastic (for metal see BSF079)
- Moulding clip for 8.0mm moulding gap and 5.0mm panel hole. Vauxhall
- Moulding clip for 8.0mm moulding gap and 6.5mm panel hole. VW Golk Mk1 Sill and general application.
- Moulding clip for 9.0mm moulding gap and 4.0mm panel hole. Ford Cortina, Capri, Escort and Granada
- Moulding clip for 9.8mm moulding flange gap, and 4mm panel hole. Chrysler Avenger, Triumph Dolomite, Vauxhall Viva HB and general application.
- Moulding clip for 14.3mm moulding gap and 4.8mm panel hole. BL Rover, Triumph 2000, Ford Cortina and Granada
- Moulding clip for 14.7mm moulding gap and 4.8mm panel hole. Humber Sceptre Series 3 (Rootes Models)
- Moulding clip for 21.0mm moulding gap and 4.6mm panel hole. Hillman Hunter, Humber Sceptre Series 3 (Chrysler Models)
- Moulding clip for 15.3mm moulding gap with stud fixing. Ford Capri MK3 and general application.
- Moulding clip for 19.8mm moulding gap and 8.0mm panel hole. BMW,Fiat, Lancia and General application.
- Moulding clip for 20.7mm moulding gap and a 5mm panel hole. Sunbeam Imp, Avenger sill.
- Side Moulding Clip. Mercedes C180 and general application.
- Moulding Clips - Miscellaneous
- Moulding Spring Clip. Ford Consul/Zephyr/Zodiac MK1 Front Wing
- Flange finisher clip. Alternative to GHF1154. Triumph range.
- Moulding clip washer used with BSF044-1. Riley RME.
- Moulding clip used with BSF044-3. Riley RME.
- Staple Clip - Mild steel moulding retainer 8mm gap. Jaguar Mk.II
- Staple Clip - Interior Door Lower Chrome Strip and Bonnet Side Chrome Strip. 'E' Type and general application
- Moulding Clips - Reveal
- Reveal moulding clip. Humber Sceptre MK1/2.
- Reveal moulding clip. Aston Martin DBS, Ford Zephyr/Zodiac MK1V and general application.
- Moulding Clips - Wire
- 'T' Bolts - Metal (Click on Photo for more info)
- Moulding 'T' bolt . Ford Escort MK1, Austin A30/35 and general application.
- Moulding 'T' bolt . MG and general application.
- Moulding 'T' bolt for Rover P4 lower moulding.
- Moulding 'T' bolt. Austin A.35 front grille surround moulding
- Moulding 'T' bolt . Classic Mini Estate and general application.
- Moulding 'T' bolt. General application.
- Moulding 'T' bolt. Cortina MK111 and general application.
- Moulding 'T' bolt. Ford Capri Bonnet and general application.
- Moulding 'T' bolt. Ford Cortina MK111 and general application.
- Moulding 'T' bolt. Ford Granada MK1 and general application.
- Moulding 'T' bolt. Ford Granada MK1 and general application.
- Moulding 'T' bolt. General application.
- Moulding 'T' bolt. MG, Riley RM and general application
- Moulding 'T' bolt. Jaguar MkVII and general application.
- Moulding 'T' bolt. Humber Super Snipe and general application.
- Pronged 'T' bolt used for threaded attachment of trimmed board. General application.
- Moulding 'T' bolt with M5 x 16.0mm threaded stud and wing nut. Riley Elf/Wolseley Hornet/Mini Dashboard.
- Moulding 'T' bolt with M5 x 25.0mm threaded stud with a domed nut in stainless steel. XK150 Hood clip
- Moulding 'T' bolt with M5 x 30.0mm threaded stud. General application
- Moulding 'T' bolt with M5 x 16.0mm threaded stud. General application
- Moulding 'T' bolt. General application.
- Moulding 'T' bolt with M6 x 25.0mm threaded stud. Ferrari 330GT/GTC/GTS Sill Moulding and general application.
- 'T' Nuts - Metal
- 4 pronged 'T' Nut. M4 thread size, 6.0mm depth. General application.
- 4 pronged 'T' Nut. M5 thread size, 6.0mm depth. General application.
- 4 pronged 'T' Nut. M5 thread size, 8.0mm depth. General application.
- 4 pronged 'T' Nut. M6 thread size, 7.0mm depth. General application.
- Slab Base 'T' Nut. M4 thread size, 5.2mm depth. General application.
- Slab Base 'T' Nut. M5 thread size, 7.5mm depth. General application.
- Slab Base 'T' Nut. M6 thread size, 8.5mm depth. General application.
- Trim / Body Fasteners
- Badge/Push-on Fixes
- Push-on fix for 3/32" diameter pin. General application.
- Push-on fix for 1/8" diameter pin. General application.
- Push-on fix for 3/16" diameter pin. General application.
- Push-on fix for 5/32" diameter pin. (4.0mm) General application
- Push-on fix for 1/4" diameter pin (6.35mm). General application
- Push-on fix for 5/16" diameter pin (8.00mm). General application
- Metal fix for 3/16" diameter badge pin. Used in 3/8"x21/64" slot. Vauxhall range.
- Metal fix for 1/8" diameter badge pin. Used in 1/4" X 3/16" slot. General application.
- Plastic fix for 3/32" diameter badge pin in 9/64" panel hole. General application
- Plastic fix for 3/32" diameter pin in 5/32" panel hole. General application.
- Plastic fix for 1/8" diameter pin in 3/16" panel hole. General application.
- Plastic fix for 5/32" diameter pin in 7/32" panel hole. General application
- Plastic fix for 3/16" diameter pin in 1/4" panel hole. General application
- Circular push-on ratchet plate - 3mm stud diameter. General application.
- Circular push-on ratchet plate - 3mm stud diameter. General application.
- Circular push-on ratchet plate - 5mm stud diameter. General application.
- Circular push-on ratchet plate - 5mm stud diameter. General application.
- Circular push-on ratchet plate - 5mm stud diameter. General application.
- Circular push-on ratchet plate - 8mm stud diameter. General application.
- Circular push-on ratchet plate - 3/8" stud diameter. General application.
- Round, ratchet, badge fix for 1/8"pin diameter. General application.
- Round, ratchet, badge fix for 1/8"pin diameter. General application.
- Round, ratchet, badge fix for 3/16"pin diameter. General application.
- Round, ratchet, badge fix for 1/4"pin diameter. General application.
- Self-threading washer nut 1/8" diameter pin. General application.
- Self threading nut for 3/16" diameter pin.
- Bonnet Fastenings and Buffers
- Bonnet/Tailgate Buffers. Ford Fiesta and general application.
- Bonnet Buffers. Ford Escort MK1 and general application.
- Bonnet Buffers. Ford Cortina/CapriMK1/ Consul/Zephyr/Zodiac MK1/2/3 and general application.
- Bonnet Buffers. Triumph Herald, Spitfire/GT6 and general application.
- Bonnet Buffers. Ford Escort/Cortina MK11, Capri MK2/3 and general application.
- Bonnet Stay Clips
- Bonnet Stay Fastener. General application, Ford Cortina MK1 and Early Mini.
- Bonnet Stay Fastener. Early Mini.
- Bonnet Stay Clip. Citroen/Peugeot and general application.
- Bonnet Stay Clip. Citroen/Peugeot and general application.
- Bonnet Stay Clip. Fiat and general application.
- Bonnet Stay Clip. Ford and general application.
- Bonnet Stay Clip. Ford and general application.
- Bonnet Stay Clip. Hyundai, Lexus, Toyota and general application.
- Bonnet Stay Clip. Lexus, Toyota, VW/Audi, Skoda, Seat and general application.
- Bonnet Stay Clip. Lexus, Toyota, and general application.
- Bonnet Stay Clip. VW/Audi and general application.
- Carpet Fasteners
- Carpet Fastener. Aston Martin, Jaguar and general application.
- Carpet Fastener in nickel plate, used with 541A, 541Ablk and 541ABrass. General application.
- Carpet/Hood fastener in nickel plate, used with 541A or 541Ablk. General application
- Carpet ring used with 74879, in nickel plate. General application.
- Carpet ring used with 74879, in black. General application.
- Door Handles and Accessories
- Window Winder Handle. Classic Mini, MGB/C,Triumph TR7 and general application.
- Handle Locating Pin used with BSF818 & BSF819. Triumph Spitfire/GT6, Herald, TR4-4A and general application.
- Door Handle Spring used with BSF818 & BSF819. Triumph Spitfire/GT6, Herald, TR4-4A and general application.
- Door Trim Pad Clips
- Spring retainer for snap fit into a 6.3mm panel hole and 3mm total material thickness. General application.
- Spring retainer for snap fit into a 7.0mm panel hole and 5mm total material thickness. General application.
- Door Trim Pad Clip, suits VW
- Door trim pad clip for .100" board and snap fit in 9/32" panel hole. General application.
- Door trim pad clip for .100" board and snap fit in 1/4" panel hole. Triumph Herald, Spitfire, TR6, GT6, Jaguar, Minor 1000 and general application.
- Door trim pad clip for .110" board and snap fit in 1/4" panel hole. BL Maxi, MG and general applications.
- Door trim pad clip for .110" board and snap fit in 1/4" panel hole, for extend panel application. Jaguar, Lotus and general application.
- Door Trim Pad Clip for Rover SD1
- Snapsac' sealing sleeve, for 8.5mm panel hole, depth 16.0mm. General application.
- Snapsac' sealing sleeve, for 8.5mm panel hole, depth 18.0mm. General application.
- Snapsac' sealing sleeve, for 8.5mm panel hole, depth 16.0mm, internal dia. 6.75mm. Land Rover and general application.
- V' panel springs for panel thickness of 5.5mm, panel hole of 8.0mm. Ford Cant Rail and general application.
- Mini Estate rear compartment edge trim clip, for use with part no. 14480.
- Mild steel pronged, trim board staple for use with either part no. 10020,12770, or 14190. General application.
- Door Trim Pad Clip for use with part no.14190. Ford Consul/Zephyr/Zodiac MK11 and general application.
- Backing plate for interior trim used with BSF068 rivet, and BSF316. Rover, Rolls Royce/ Bentley and general application.
- Spring clip used with BSF087P & BSF970P. Rover, Rolls Royce and Bentley, and general application.
- Jaguar MK1 Cant Rail Clip.
- Jaguar MKX Cant Rail Clip.
- Trim fastener for .090" board thickness and snap-fit in 21/64" diameter panel hole. Ford/LandRover/VW and general application.
- Trim fastener for .095" board thickness and snap fit in 11/32" diameter panel hole. BL Marina, Mini and MG
- Trim fastener for .095" board thickness and snap fit in 11/32" diameter panel hole. Jaguar (BD34981)
- Trim fastener for 0.110" board thickness and snap fit in 11/32" diameter panel hole. Porsche,Triumph Stag.
- Trim Retainer - used with TPF048/050. General application.
- Trim fastener/Headlamp surround clip. Fir tree type. Jaguar XJ40, XJ6 and general application.
- 'Durable Dot' and 'Lift The Dot' Studs
- 'Durable Dot' Fasteners
- Stud for use with either the 'Durable' snap fastener or 'Veltex' carpet fastener in nickel plate. General application.
- Stud for use with either the 'Durable' snap fastener or 'Veltex' carpet fastener in black. General application.
- Durable Dot/Veltex stud, with a reduced diameter of 12.0mm, in nickel plate. General application.
- Durable Dot Socket in nickel plate. General application.
- Durable Dot Socket in black. General application.
- Durable Dot Button, diameter 16.0mm and height 9.0mm,in nickel plate. General application.
- Durable Dot Button, diameter 15.0mm and height 6.0mm, in nickel plate. General application.
- Durable Dot Button, diameter 15.0mm and height 6.0mm, in white. General application.
- Durable Dot button, head size 15.0mm in Ebanol black. General application.
- Durable Dot button, head size 14.0mm in Ebanol black. General application.
- 'Lift the Dot' Fasteners
- Lift The Dot fastener, thread height 10.0mm with 2BA thread size. General application.
- Lift The Dot fastener, thread length 16.0mm, with 2BA thread size. General application.
- Lift The Dot fastener, double height with a 2BA thread size. General application.
- Lift The Dot fastener, double height with a self-tapping thread. General application.
- Two pronged Lift the Dot Stud and Washer. General application.
- Lift the Dot Stud and Washer. General application.
- Lift the Dot stud with two screw base (Thick) in nickel plate, used with Nos. 608 and 708A combination. General application
- Lift The Dot Socket and Clinch Plate. General application.
- Dust Covers,Boots and Gaiters
- Handbrake Lever Gaiter. Ford Zephyr/Zodiac MK111, Lotus Cortina/GT MK1, Classic Capri, Corsair '63-65'.
- Handbrake Lever Gaiter. Triumph Herald, Spitfire/GT6, Ford Anglia 105E and general application.
- Handbrake Lever Gaiter. Triumph Dolomite,GT6, Ford Cortina MK2 and general application.
- Track Rod End & Ball Joint Boot. General application.
- Track Rod End & Ball Joint Boot. General application.
- Track Rod End & Ball Joint Boot. General application.
- Eyelets and Rings
- Brass Eyelet and Ring assembly - 3/16" diameter. (50 pairs in pack)
- Brass Eyelet and Ring assembly - 1/4" diameter. (40 pairs in pack)
- Brass Eyelet and Ring assembly - 5/16" diameter. (30 pairs in pack)
- Brass Eyelet and Ring assembly - 3/8" diameter. (25 pairs in pack)
- Nickel Plated Brass Eyelet and Ring assembly - 3/8" diameter. (25 pairs in pack)
- Brass Eyelet and Ring assembly - 7/16" diameter. (20 pairs in pack)
- Brass Eyelet and Ring assembly - 1/2" diameter (15 pairs in pack)
- Grommets - Rubber/PVC
- Open Rubber Grommet for use in 1/2" (12.7mm) dia. panel hole. General application.
- Open Rubber Grommet for use in 1" (25.4mm) dia. panel hole. General application.
- Blind PVC Grommet for use in 1/4" (6.4mm) dia. panel hole. General application.
- Blind PVC Grommet for use in 3/8" (9.5mm) dia. panel hole. General application.
- Blind PVC Grommet for use in 1/2" (12.3mm) dia. panel hole. General application.
- Blind PVC Grommet for use in 19/32" (15.08mm) dia. panel hole. General application.
- Blind PVC Grommet for use in 3/4" (19.05mm) dia. panel hole. Morris 1000 door and general application.
- Blind PVC Grommet for use in 1" (25.4mm) dia. panel hole. General application.
- Rubber Grommet for use in 3/16" (4.8mm) dia. panel hole. Ford and general application.
- Rubber Grommet for use in 15/64" (5.95mm) panel hole. Jaguar and general application.
- Rubber Grommet for use in 1/4" (6.35mm) dia. panel hole. Jaguar and general application.
- Rubber Grommet and Ferrule. Regulator/Control Box RB340 and general application.
- Hog Rings and Hooks
- Hog Ring for 5.0mm cord, in stainless steel. General application.
- Hog Ring for 6.0mm cord, in stainless steel. General application.
- Hog Ring for 8.0mm cord, in stainless steel. General application.
- Latches and Studs
- Cubby box lid striker and latch. Lotus Cortina, Corsair, MG, Jaguar, Rolls Royce and general application.
- Cubby box lid striker and latch. Triumph and general application.
- 2BA Ball Stud in Zinc Plate used with 41460
- Door Catch in Nickel Plated steel. General application.
- 2BA Ball Stud in Zinc Plate used with BSF182
- M5 Ball Stud in Zinc Plate used with BSF182
- M5 Female Ball Stud in Zinc Plate used with BSF182
- Latch Clip. Jaguar 'E' Type, Triumph GT6 and general application.
- 2BA Ball Stud in Brass used with BSF177
- 2BA Ball Stud in Brass used with BSF177
- M5 Ball Stud in Brass used with BSF177
- Latch Clip. Jaguar 'E' Type and general application.
- Latch Clip used with BSF188. General application.
- Plug Button - Metal/Plastic
- Plastic Plug Button, 16.7mm head dia., for 9.5-13.5mm hole. General application.
- Plastic Plug Button, 24.8mm head dia., for 14-21mm hole. General application.
- Plastic Plug Button, 34.8mm head dia., for 22-30mm hole. General application.
- Push/Drive Rivets, Scrivets - Plastic
- Plastic expansion rivet, panel thickness 1.6mm-4.8mm. Hole diameter 4.8-5.4mm. Rolls Royce and general application.
- Plastic expansion rivet, panel thickness 2.4mm-4.5mm. Hole diameter 5mm. General application.
- Plastic expansion rivet, panel thickness 2.4mm - 7.8mm. Hole diameter 5.5mm - 6.5mm, in natural. General application.
- Plastic expansion rivet, panel thickness 2.4mm - 7.8mm. Hole diameter 5.5mm - 6.5mm, in black General application.
- Plastic expansion rivet, panel thickness 2.4mm - 8.5mm. Hole diameter 6.5mm - 7.0mm. General application.
- Plastic expansion rivet, panel thickness 0.8 - 9.5mm. Hole diameter 8.0 - 8.5mm. LandRover and general application.
- Plastic expansion rivet, panel thickness 4.0-7.0mm. Hole diameter7.9-8.5mm. Head diameter 16.0mm. Vauxhall range, Ford, Citroen and general application.
- Plastic expansion rivet for VW Golf MKI Grille Mountings and general application
- Plastic expansion rivet, shiny, head diameter 15.88mm, panel hole 6.0mm, length 14.0mm, in black. Volvo and general application.
- Rokut rivet, head size 11.4mm, panel hole 4.8mm-5.4mm, material thickness 1.6mm-4.8mm. General application.
- Push rivet, head diameter 13.7mm, panel hole 6.5mm, length 19.1mm, in white. General application.
- Push rivet, matt, head diameter 20.0mm, pin head diameter 8.0mm, panel hole 6.5mm, length 17.0mm, in black. BMW and general application.
- Push rivet, matt, head diameter 19.8mm, pin head diameter 16.0mm, panel hole 7.0mm, length 8.5mm, in black. BMW and general application.
- Push rivet, matt, head diameter 20.2mm, pin head diameter 15.0mm, panel hole 9.0mm, length 14.0mm, in black. BMW and general application.
- Push rivet, matt, head diameter 12.0mm, pin head diameter 12.0mm, panel hole 8.5mm, length 10.0mm, in grey. Mercedes and general application.
- Push rivet, shiny, head diameter 15.3mm, panel hole 6.5mm, length 15.0mm. VW/Audi and general application.
- Push rivet, matt, head diameter 20mm, pin head diameter 15mm, length 9.0mm. VW/Audi and general application.
- Push rivet, matt, head diameter 15.2mm, pin head diameter 8.0mm, panel hole 6.5mm, length 19.0mm, in black. Vauxhall and general application.
- Push rivet, matt, head diameter 20.2mm, pin head diameter 8.0mm, panel hole 7.0mm, length 19.0mm, in black. Vauxhall and general application.
- Ford Sierra windscreen scuttle screw rivet (short) . 83-87 Ford part no. E864164S
- Screw rivet, closed end type, 2.5mm-8.0mm material thickness, head size 15.5mm and 6.5mm panel hole. General application.
- Screw rivet, closed end type, 2.5mm-8.0mm material thickness, head size 17.6mm and 6.5mm panel hole. General application.
- Screw rivet, open end type, 2.0mm-6.0mm material thickness and 8.0mm panel hole. Rolls Royce and general application.
- Screw rivet, open end type, 3.0mm-10.0mm material thickness and 8.0mm panel hole. General application.
- Screw rivet, open end type, 4.0mm material thickness, head size 12.0mm and 9.0mm square panel hole. Ford Escort, Fiesta tailgate.
- Screw rivet, open end type, 5.0mm material thickness, head size 26.3mm and 6.3mm panel hole. Ford Cortina, Granada, Capri, Escort insulation clip.
- Drive rivet, oval in shape, grained, head length 23mm, panel hole 6.5mm. Suits VW/Audi and general application.
- Drive rivet, grained, head diameter 16mm, panel hole 6.0mm. Vauxhall and general application.
- Drive rivet, shiny, head diameter 20.5mm, panel hole 6.5mm, length 12mm. Suits BMW and general application.
- Quarter Turn Studs and Sockets
- Common Sense Turnbutton, pronged eyelet and washer. General application.
- Common Sense Turnbutton - Two Holed Fixing in Nickel Plate. General application.
- Common Sense Turnbutton (Double Height) - Two Holed Fixing in Nickel Plate. General application.
- Common Sense Turnbutton - Pronged with clinch plate. General application.
- Common Sense Turnbutton (Double Height) - Screw Fixing (15mm). General application.
- Common Sense Turnbutton, pronged eyelet and washer, in black. General application.
- Common Sense Turnbutton - Two Holed Fixing in black. General application.
- Common Sense Turnbutton - Pronged with clinch plate, in black. General application.
- Quarter Turn quick release fastener, panel thickness 5.6mm-7.3mm. Mini and general application.
- Quarter Turn quick release fastener, panel thickness 5.6mm-7.3mm in white. Mini and general application.
- Quarter Turn quick release fastener, panel thickness 5.6mm-7.3mm. General application.
- Quarter Turn quick release fastener, panel thickness 6.3mm. General application.
- Quarter Turn quick release fastener, panel thickness 7.6 - 8.4mm. General Application.
- Quarter Turn quick release fastener, panel thickness 20.2mm. General application.
- Quarter Turn quick release fastener, grey in colour. Triumph Stag.
- Quarter Turn quick release fastener. Aston Martin, Ford and general application.
- Quarter Turn quick release fastener. Rover SD1 Fusebox.
- Plastic washer used with quick release fasteners 74150 / 74151 / 76040 / 83270 above. Mini and general application.
- Plastic washer in white used with quick release fasteners 74150-NAT / 83270 above. Mini and general application.
- Quarter Turn Cam, panel thickness 1.2mm, in black, used with the above. Triumph and general application.
- Quarter Turn Cam, panel thickness 2.0mm, in black, used with the above. Mini and general application.
- Quarter Turn Cam, panel thickness 3.3mm, in blue, used with the above. General application.
- Ratchet Type quick release fastener, panel thickness 8.2mm-30.3mm, panel hole 8.5mm. MGRV8 and general application.
- Ratchet Type quick release fastener, panel thickness 8.2mm-12.8mm, panel hole 8.5mm. MGRV8 and general application.
- Ratchet Fastener Cam - Flush, used with 77561/75051. MGRV8 and general application.
- Ratchet Fastener Cam - 2.0mm, used with 77561/75051. General application.
- Ratchet Fastener Cam - 6.0mm, used with 77561/75051. MGRV8 and general application.
- Rivets- Bifurcated/Pop/Semi-tubular
- Moulding Clip Rivet. Ford, Vauxhall and general application.
- Bifurcated rivet: No9, 5/16" (8.0mm) head size, 5/32" (3.9mm) diameter and 7/16" (11.0mm) in length (Deeper Split). General application.
- Bifurcated rivet: No9, 5/16" (8.0mm) head size, 5/32" (3.9mm) diameter, and 1" (25.4mm) in length. General application.
- Semi-tubular rivet: 7/32" (5.56mm) head size, 1/8" (3.2mm) diameter and 1/4" (6.35mm) in length. MG Rocker Cover Plate and general application.
- Semi-tubular rivet: No9, 5/16" (8.0mm) head size, 5/32" (3.9mm) diameter and 11/32" (8.73mm) in length. General application.
- Semi-tubular rivet: No9, 5/16" (8.0mm) head size, 5/32" (3.9mm) diameter and 11/32" (8.73mm) in length. General application.
- 3.0 x 8.0mm Domed, steel pop-rivet in black. General application
- 3.2 x 6.0mm Domed, steel pop-rivet in Stainless Steel. General application.
- 3.2 x 6.0mm Domed, steel pop-rivet in black, used with E550P. General application.
- 3.2 x 8.0mm Domed, aluminium pop-rivet in black. General application.
- 3.2 x 10.0mm Domed, aluminium pop-rivet in black, large flange. General application.
- 4.8mm x 16mm aluminium rivet in black. Mini wheel arches and general application.
- 4.8 x 16mm Domed, aluminium pop-rivet. General application
- Pop rivet for 7/64" diameter hole. Specially recommended for use with BSF136 moulding clip on Triumph Stag Hardtop (back).
- Aluminium pop rivet 3/32" x 3/8". General application.
- 1/8" pop rivet. General application.
- 1/8" x 5/8" Steel Rivet. General application.
- Seat Diaphragm Clips
- Seat Diaphragm Clips. General application.
- Seat Diaphragm Clips. General application.
- Seat Diaphragm Clips. General application.
- Self-Sealing Plugs
- Plastic self-sealing plug for use in 12.7mm (1/2") diameter panel hole in black. General application.
- Plastic self-sealing plug for use in 14.3mm (9/16") diameter panel hole in black. General application.
- Plastic self-sealing plug for use in 15.9mm (5/8") diameter panel hole in natural. General application.
- Plastic self-sealing plug for use in 15.9mm (5/8") diameter panel hole in black. General application.
- Plastic self-sealing plug for use in 22.2mm (7/8") diameter panel hole in natural. General application.
- Plastic self-sealing plug for use in 22.2mm (7/8") diameter panel hole in black. General application.
- Plastic self-sealing plug for use in 25.4mm (1") diameter panel hole in black. General application.
- Plastic self-sealing plug for use in 31.8mm (1.1/4") diameter panel hole in natural. General application.
- Plastic self-sealing plug for use in 34.9mm (1.3/8") diameter panel hole in black. General application.
- Plastic self-sealing plug for use in 38.1mm (1.1/2") diameter panel hole in natural. General application.
- Shims and Spacers
- Aluminium Shim, 0.128" thick, for bonnet hinge on the Jaguar 'E' Type.
- Aluminium Shim, 0.064" thick, for bonnet hinge on the Jaguar 'E' Type.
- Aluminium Shim, 0.036" thick, for bonnet hinge on the Jaguar 'E' Type.
- Steel Shim - Front Suspension. Triumph Spitfire/GT6, Vitesse, Herald.
- Sun Visor Clips
- Sun Visor Clip - White. Ford Zephyr/Zodiac MK111, Classic Capri and general application.
- Sun Visor Clip - Black. MGB/C GT/Roadster, Sprite, Midget and general application.
- Trim Buttons, Studs and Fir Tree Buttons
- Trim Button, head size 18.0mm and panel hole 8.0mm in black. Ford under-dash felt, and General application
- Trim Button, head size 18.0mm and panel hole 8.0mm in grey. Ford under-dash felt, and General application
- Snap-in stud for 3/16" diameter panel hole and 3.2 - 4.8mm material thickness. Ford Cortina bonnet flip seal and general application.
- W' Button for material thickness 3.2mm-4.8mm and panel hole 7.1mm, with a plain head. General application.
- W' Button for material thickness1.6mm-3.2mm and panel hole 6.2-6.5mm, with a plain head. General application.
- W' Button, head size 14.0mm, material thickness 0.8mm-5.9mm, panel hole 7.0mm, plain head. Rover, Ford, Rolls Royce and general application.
- Snap-in stud for 1/4" diameter panel hole and 3.7mm material thickness. General application.
- Plastic carpet socket. Jaguar, Ford Cortina and general application.
- Plastic carpet stud used with 80560. Jaguar, Ford Cortina and general application.
- Plastic Stud. Black with head diameter 7.56mm and panel thickness 2.4-5.8mm. Hole diameter 3.5mm. Jaguar, Rover P5/5B and general application.
- Arrow clip, head size 12.5mm, material thickness 0.8mm-6.8mm, panel hole 6.55mm, plain head. Rover and general application.
- Fir Tree Button for 5.0mm dia. panel hole and material thickness 1.2-5mm. Head 12.9 x 5.2mm. Door seals and general application.
- Fir Tree Button for 4.8mm diameter panel hole and material thickness 0.9-7.9mm. Head diameter11.0mm. Colour white with a plain head. General application.
- Fir Tree Button for 4.8mm diameter panel hole and material thickness 0.8-13.0mm. Head diameter11.0mm. Colour black with a matt head. General application.
- Fir Tree Button for 5.0mm diameter panel hole and material thickness 1.2-6mm. Head diameter16.0mm. Colour black with a matt head. General application.
- Fir Tree Button, for 6.4mm panel hole and material thickness 2.3 - 14.2mm. Head diameter 17.8mm, black. General application.
- Fir Tree Button for 7.2mm diameter panel hole and material thickness 2.3-30.00mm. Head diameter 16.4mm. Colour White. General application.
- Fir Tree Button for 7.2mm diameter panel hole and material thickness 2.5-9.0mm. Grained head, black, diameter 24.00mm. General application.
- Fir Tree button for 1/4" diameter panel hole and for material thicknesses from 2.8 - 20.3mm, head size 17.9mm. Colour black (was PC47564) General application.
- Tenax Fasteners
- Tenax fastener, length 3/32" with a 2BA thread size. General application.
- Tenax fastener, length 3/8" with a 2BA thread size. General application.
- Tenax fastener, length 5/8" with a 2BA thread size. General application.
- Tenax stud, self-tapping, thread length 12.0mm. General application.
- Tenax washer used with all Tenax studs. General application.
- Tenax fastener socket and standard locking ring. General application.
- Tenax fastener socket and extented (3.0mm) locking ring. General application.
- Trim Fasteners - Miscellaneous
- Trim retaining clip for 3/4" diameter tubular seat frames. General application.
- Trim retaining clip for 13/16" diameter tubular seat frames. Jaguar, Triumph, Ford, Hillman and general application
- Trim retaining clip for 1" diameter tubular seat frames. General application
- Trim retaining clip for 1 1/8" diameter tubular seat frames. General application
- Metal panel spring button. Ford underdash.
- Pronged panel spring button with panel thickness 4.0mm-18mm. TVR.
- Boot Floor Clip. Volvo 1800.
- Kits
- Comprehensive Kits- for use on a variety of Makes and Models
- Austin Kits
- Austin Mini Estate and Van Petrol Tank Clips
- Austin Mini Weathershield Mounting Clips
- Austin Mini Pick-Up Tilt/Cover Clips
- Ford Kits
- Ford Escort/Cortina Grille Clips
- Ford Escort MkI Moulding Clips
- Ford Escort / Cortina Weatherseal Clips
- Ford Zodiac MK111 Rear Moulding Clips
- Ford Pinto Exhaust Manifold Studs and Nuts
- Hillman Kits
- Humber Kits
- Humber Sceptre Mk1/11 Moulding Clips with Rivets
- Jaguar Kits
- MG Kits
- MG Midget Sill Moulding Clips
- Rover Kits
- Rover P4 Bonnet Moulding Clips
- Rover P6 Moulding Clips
- Triumph Kits
- Triumph Spitfire / GT6 Weatherseal Clips
- Triumph Stag Hardtop Moulding Clips
- Triumph Stag Weatherseal Clips
- Triumph TR4/5 Front Wing Fitting Kit
- Parts for Modern Cars
- Universal Fastenings (i.e. various makes and models.) Also see the various generic sections under 'Classic Cars' e.g screws of all sizes, washers, nuts, adhesives and sealants etc
- Universal Expanding Nut. White. M4, 8mm x 9.7mm x 10.4mm
- Universal Clip, Black. 6.8mm x 17mm x 18mm. Suits Japanese Cars
- Universal Clip, Dark Grey. 6.8mm x 17mm x 18mm. Suits Japanese Cars
- Universal Clip, Black. 8mm x 16mm x18mm. Suits Nissan
- Bentley/Rolls-Royce
- BMW
- Underbonnet Insulation Retainer. BMW E36-E60
- Bumper Push-type Retainer, Black. BMW
- Bumper Push-type Retainer, Black. BMW
- Bumper Push-type Rivet, Black. BMW E36
- Boot Lining Retainer, Black. BMW / Ford
- Shroud Clip. BMW
- Door Trim Pad Clip. BMW
- Door Trim Panel Retainer, White. BMW
- Door Trim Panel Retainer. White. BMW E46-60, Renault
- Door Trim Panel Retainer, Grey. BMW E46-60
- Floormat Twist Lock Clip. BMW E39-E46
- Retaining Clip. BMW
- Side Moulding Clip. BMW E36
- Side Moulding Clip. BMW E46
- Side Moulding Clip. White. BMW
- Moulding Insert (Yellow.) BMW
- Wing Moulding Grommet, Green. BMW
- Chrysler
- Bonnet Insulation Retainer. Black. Chrysler Cherokee
- Bumper Blind Rivet. Curved, black. Chrysler Cherokee
- Bumper Blind Rivet. Flat, black. Chrysler Cherokee
- Door Trim Panel Retainer, white. Chrysler Cherokee
- Lower Rear Moulding Drive-type Rivet. Chrysler Cherokee
- Wing and Bumper Shield Retainer. Black. Chrysler
- Clip. Chrysler 300C
- Daihatsu
- Wing Push-type Retainer. Yellow. Daihatsu
- Fiat / Alfa Romeo / Lancia
- Clip Insulator: Fiat, Alfa Romeo, Lancia
- Screw Grommet,White. Fiat/Alfa Romeo/Lancia. Toyota / Nissan / Mitsubishi
- Ford
- Push Type Retainer, Ford, Vauxhall /Opel
- M6 Screw Nut. Black. Ford / Opel / BMW / VW
- Wheelarch Clip FORD
- Expanding Nut, Yellow. 12x19x22mm. FORD
- Bonnet Insulation Retainer, White Ford
- Bonnet Insulation Retainer, Black. FORD
- Bonnet Insulation Ring. Grey. VW T4, FORD
- Under Bonnet Insulation Retainer in black. FORD
- Boot Retainer. White. Ford Connect
- Insulated Dashboard Clip. Ford
- Door Trim Pad Clip, blue, suits Ford
- Door Trim Panel Retainer, Ford Focus C- MAX
- Door Trim Panel Retainer, Black 7,0x24x25mm Ford SFA N
- Door Trim Panel Retainer. White. Ford/Opel
- Interior Trim Panel Retainer, Grey. Ford T15
- Mudshield Push-type Retainer. Ford Focus / Fiesta
- Panel Retainer, Ford: 1981 - ON
- Roof Trim Retainer. Grey 10mm x 49mm x 30mm. Ford
- Roof Trim Retainer. Dark Grey. 8.4mm x 21mm x 25.4mm. American Ford
- Roof Trim Retainer. Grey. FORD
- Roof Trim Push-type Retainer. Light Grey. 7.0mm x 24mm x 25mm . Ford
- Steering clip. Ford Focus / Transit
- Wing Push-type Retainer. White. Ford Connect.
- Honda
- Bonnet Trim Retainer. Black. Honda/Hyundai
- Boot Lining Retainer, Dark Grey. Honda / Toyota
- Bumper Clip. Honda
- Bumper Clips with Metal, Short. Honda
- Bumper Clips with Metal, Long. Honda
- Bumper Back Corner Connector. Honda
- Bumper Drive-type Rivet, Black. Honda
- Door Weatherstrip Clip, Green. Honda / Toyota
- Rocker Panel Clip. Honda
- Window Moulding Clip, White. Honda
- Wing Push-type Retainer, Black. Honda
- Wing Clips. Honda
- Hyundai
- Clip Cover. Kia Sportage, Hyundai
- Fir-Tree Clip. Kia/Hyundai
- Screw Clip, Black. Hyundai / Toyota
- Bonnet Insulation Retainer, Black. Hyundai
- Body Side Moulding Clip with Sealer. Yellow. Hyundai Accent and Elantra
- Body Side Moulding Clip with Sealer, Yellow. Hyundai
- Body Side Moulding Clip with Sealer, Yellow. Hyundai Elantra
- Bumper Push-type retainer, Black. Kia / Hyundai
- Panel Cover Clip, Fawn. Hyundai
- Retaining Clip, Black. Hyundai
- Retaining Clip, Yellow. Hyundai
- Retaining Clip, Black. Kia/Hyundai
- Side Moulding Clip, White. Hyundai
- Trim Panel Retainer, black. Kia Sorento, Hyundai
- Window Moulding Clip. White. Hyundai H100
- Wing Push-type Retainer. Hyundai
- Kia
- Body Side Moulding Clip. White. Kia Sorento
- Trim Panel Retainer, black. Kia Sorento
- Land Rover
- Door Trim Pad Clip in Black. Land Rover
- Door Trim Pad Clip in Blue. Land Rover
- Roof Insulation Clip. Land Rover
- Roof Insulation Clip. Land Rover
- Headlining Clip. Land Rover
- Wing Push-type Retainer. Land Rover and Chrysler Jeep
- Mazda
- Bonnet Seal Retainer. Black. Mazda
- Boot Lining Retainer, Grey. Mazda
- Boot Lining Retainer. Short, grey. Mazda
- Boot Lining Retainer. Short, black. Mazda
- Mudguard Retainer. Black. Mazda/Subaru
- Mudguard Retainer, Short. Mazda / Honda / Nissan / Toyota
- Retaining Clip, black. Mazda 3
- Retaining Clip, Head Diameter: 18mm, Stem Length: 18mm, Snaps Into 8mm Hole, Panel Thickness: 7mm. Mazda
- Mercedes
- Tubular Grommet, Red. Mercedes
- Plastic Screw Nut in black. Mercedes/ BMW
- Bumper Clip. Mercedes/BMW/Mitsubishi
- Boot Carpet Clip. Mercedes/Peugeot
- Door Panel Clip. Mercedes/Skoda
- Door Trim Panel Retainer. White. Mercedes
- Door Trim Panel Retainer. White. Mercedes 115-123
- Door Trim Panel Retainer. White. Mercedes
- Side moulding clip. Mercedes W124 and general application.
- Side moulding clip for a 11.5mm moulding gap and a 7.0mm panel hole. Mercedes and general application.
- Rocker Panel Moulding Clip. Transparent. Mercedes 201
- Side moulding clip for a 12.0mm moulding. Mercedes and general application.
- Side moulding clip for a 9.45mm moulding. Mercedes and general application.
- Mitsubishi
- Bonnet Insulation Retainer, Mitsubishi 1993 - on
- Nissan
- Retaining Clip, HD:18mm, Stem : 16 mm, snaps into 7 mm hole. Nissan
- Front Bumper Push-Type Retainer in black. Nissan/Mazda
- Bumper Push-Type Retainer. Nissan/Mazda
- Bumper Push-Type Retainer in black. Nissan / Subaru
- Bumper Push-Type Retainer, Grey. Nissan/Vauxhall/Opel
- Bumper Push-Type Retainer in black
- Bumper Push-Type Retainer in light grey
- Boot Lining Retainer in black. Nissan/Mitsubishi
- Side Moulding Clip. Nissan
- Peugeot / Citroen
- Bonnet Insulation Retainer, Black. Citroen
- Bonnet Stay Clip. Peugeot / Citroen
- Bumper Push-type Retainer. Peugeot / Citroen
- Door Panel Clip. Peugeot 206
- Door Trim Panel Retainer, white. Citreon C3, Peugeot
- Headlight Clip. Citroen C4,C5
- Moulding Retainer Clip. Peugeot 406
- Retaining Clip, Black. Peugeot
- Retaining Clip, Black. Peugeot
- Retaining Clip, Black. VW /Audi T4 and A3 /Peugeot/Citroen
- Push-type Retainer, Black. Peugeot 307 / VW
- Side Moulding Clip, Black. Citroen C4
- Side Moulding Clip, White. Peugeot Partner and 206
- Side Moulding Clip, Black. Peugeot 206, Partner and Berlingo
- Side Moulding Clip. Peugeot Boxer / Fiat Ducato
- Side Moulding Clip, White. Peugeot 206, Fiat
- Side Moulding Clip, White. Peugeot 206-306
- Renault
- Screw Grommet. White. Renault Megane, VW
- Boot Lining Retainer. Black. Renault 9/11/19
- Bumper Retainer. Black. Renault Clio and Megane
- Bumper / Radiator Push-Type Retainer. Renault 9/11, Citroen, Peugeot
- Bumper Clip. Edge Back. Renault 9/11
- Door Trim Panel Retainer. Renault/Ford /Citroen
- Door Trim Panel Retainer, Black Renault 19, Clio
- Floor Covering Clips, Black. Renault/Peugeot
- Side Moulding Clip, White. Renault Kangoo
- Retaining Clip. Black. Renault Clio and Megane
- Retaining Clip. Renault Kango.
- Retaining Clip, Black. Renault Megane
- Roof Trim Retainer, dark grey. Renault Traffic
- Panel Clips, White. Renault/Peugeot
- Rear Deck Leather Clip. Renault Kango and Traffic
- Seal retainer, Black. Renault Megane.
- Skoda
- Subaru
- Suzuki
- Side Moulding Clip. white. Suzuki Grand Vitara
- Retaining Clip. Black. Suzuki /Mitsubishi /Vauxhall /Toyota
- Retaining Clip. Light Grey, Suzuki /Mitsubishi /Vauxhall /Toyota
- Trim Panel Retainer, Black. Suzuki / Honda
- Trim Panel Retainer, Dark Grey. Suzuki /Honda
- Trim Panel Retainer, Light Grey. Suzuki /Honda
- Suzuki Motorbike Clip
- Toyota
- Bumper Push-Type Retainer in black. Toyota / Mitsubishi
- Bumper Clip. Toyota
- Bumper Cover Push-type Retainer. Black. Toyota Corolla
- Door Trim Panel Retainer, White. Toyota
- Door Trim Panel Retainer, Purple. Toyota/Suzuki
- Door Trim Panel Retainer, White. Toyota/Hyundai
- Mudguard clip in black
- Retaining Clip in black. Toyota
- Shroud Clip. Toyota
- Side Moulding Clip, White. Toyota
- Trim Retainer in Black
- VW / Audi
- Insert Nut, black, VW
- Housing Nut. Black. VW
- Booth Clips. Long, Black. VW Polo 95
- Expanding Nut, Black 9.5x13x12mm VW
- Expanding Nut, White, 8x18.5x15mm VW, AUDI
- Nylon snap-in nut. VW Golf 4
- Metal Protection Screw Medium Grey, VW Passat (same dimensions as AP2611)
- Metal Protection Screw, Black. VW
- Push-in Rivet, Black. VW / Audi / BMW / Mercedes / Ford / Volvo
- Bonnet Clip. VW / BMW
- Boot Lining Clip. Light Grey. VW
- Boot Lining Clip. VW Golf / Passat
- Headlamp Screw-in Retainer in black. VW T5, Golf .
- Mudguard Push-type Retainer. Small, Black. VW
- Door Panel Retainer, Black, VW 2006.BS.66
- Door Panel Retainer, Black, VW T5
- Door Panel Retainer, Black, Audi 2006.BS.66
- Door Trim Pad Clip in Green, VW, Audi A6-A8
- Door Trim Pad Clip, suits VW, Audi
- Door Trim Pad Clip in brown, VW/Audi Golf 3
- Door Trim Pad Clip, suits VW, Audi
- Door Trim Pad Clip. VW Golf / Passat
- Door Trim Panel Retainer. Black. VW/Audi
- Trim Panel Retainer. Light Grey. VW Transporter T4
- Trim Panel Retainer, Dark Grey VW Transporter T4
- Trim Panel Retainer, Black VW Transporter T4
- Trim Fastener, VW and Audi
- Trim Button head size25.0mm and panel hole 6.0mm in black. Audi and general application
- Trim Button -suits VW
- Side Moulding Clip, White. VW
- Side Moulding Clip. VW Passat
- Side Moulding Clip (High Pin). VW Golf 3
- Side Moulding Clip (Short Pin.) VW Golf 3
- Side Moulding Clip. VW Golf 3
- Moulding Insert (Green.) VW/Audi
- Side Moulding Clip with Grommet. VW Golf 3 / Peugeot
- Plate Clip, Black. VW Golf II and Passat
- Plate Clip, Grey. VW Golf III.
- Seal Retainer. VW Polo, Golf III.
- Seal Retainer. VW Golf IV
- Window Grille Retainer, Black. VW/Audi
- Window Regulator Cable Clip, ( Front Right and Left) Audi A4 2005-2009
- Vauxhall / Opel
- Push-in Rivet, Black, Opel
- Bonnet Insulation Retainer. Black. Opel
- Boot Lining Retainer, Black, Opel.
- Boot Lining Retainer. Black. Vauxhall/Opel Peugeot/Citroen
- Bumper Push-in Rivet, Bottom. Vauxhall/Opel Vectra B
- Bumper Clip. Black. Vauxhall/Opel Vectra B
- Bumper Push-in Rivet. Front, black. Vauxhall/Opel Astra G
- Grained Bumper screw-nut. Vauxhall Corsa.
- Bumper Push-type Retainer. Black. Vauxhall/Opel, BMW and Mercedes
- Cabin Clip, Black. Vauxhall/Opel
- Copper Crankcase Washer Cap. 14 x 20 x 1.2mm. Opel/Mazda/VW/Ford
- Dashboard Clip: Insulated. Vauxhall/Opel
- Door Trim Panel Retainer. Vauxhall/Opel
- Door Trim Panel Retainer. White. Vauxhall/Opel
- Headlight Retainer. White. Opel Vectra.
- Headlight Retainer, Black. Opel, Vauxhall Astra G and Corsa C
- Mirror Panel Retainer, White. Vauxhall /Opel Astra G.
- Rocker Panel Moulding Clip. White. Vauxhall/Opel
- Wing push-type Retainer. White. Opel Corsa and Combo
- Front Wing Liner Push-Type Retainer, Black. Vauxhall / Opel / Lexus & Toyota: Celica, Corolla, Matrix & Solara 1999 - ON
- Volvo
- Push-in Rivet, Black Volvo 740/760
- Rocker Panel Moulding Clip. White. Volvo S40 and V40
- New Products
- Best Sellers
